Search results for query: *

Im looking for a good condition right side comp mutha thumpr cam for 3v. let me know if anyone has one, thanks

Let me know thanks

Looking for a used set of comp mutha thumprs , let me know thanks

Like stated looking for pypes or slp muffler deletes or similer even home made. let me know thanks

Looking for used on 3 kit for 07 gt let me know what you have or if you know of one. Thanks

Seeing if anyone has any opinions I'm having issue with car not wanting to start and also running issue. It's an 07 gt that I just removed edelbrock sc setup and put stock parts back on to go turbo in spring but in meantime I want it to be drive able. Everything is back to stock except for stage...

Need coolant crossover for 07+ 3v gt let me know

Like title says looking for stock exhaust manifolds and stock air box. Let me know

Hey looking for stock throttle body for 05-09 gt let me know thanks

Selling my Edelbrock competition kit #1585 for 3v 05-09 mustang gts. Kit will include everything that is included with the competition kit from edelbrock plus the added upgrades that I have. Car made 460 at the wheels with 3.5 pulley and bolt ons. Kit has around 9000 miles and has no issues...

I'm looking for some replacement timing chain components to swap out on my engine. Preferably new or from an engine that has very low miles on it. I am thinking I might have some bad components in there and I'm getting ready to pull everything apart and check it and the timing out. Would like...

Alright I have a 07 with an edelbrock SC. Power in the 460whp range. I have the strange shock strut package with adjustable upper and Polly lowers, bmr extreme anti sway kit and a built rear end that currently has 4.10s in it. I am debating on putting my 3.73s back in the car. I am also about...

So I've been getting what I believe to be false knock in my car with an edelbrock and kooks headers. Wondering if anyone else has these issues with thier kit or if the sensor is just turned off in their cars.

Alright I ended up having to change back to my stock cams because a rocker ate one of my cam lobes. I tried to switch back to using my Vct while everyhing was apart but when I fired the car up and let it warm up it suddenly starting making allot of Vct noise so I put the lockouts back in the...

Alright I've been having some issues with hanging revs and a couple of other things and while checking over my car I noticed that the tube that coming off my supercharger and going to the PCV port on the drivers side valve cover is loose. This should be a pressed in tube an should not wiggle...

So I have been chasing a coil on plug code for a couple of weeks now and also hearing what sounded like a exhaust tick from my header. Well out of curiosity I pulled my valve covers and low and behold I had a rocker just hanging out wedged up by its spring. Then I took a look at the cam love and...

Im havin this issue with my new tune where when I am coasting with clutch pushed in the idle will drop down below 500rpms on occasion and it will pop a code. Sometimes the car will also stall out. Also when I come to a complete stop the idle will come back up to the commanded 900rpms. I know it...

Was turning aroun off 190 at central Texas college and puter stang, slammed, with the number 43 in the drivers corner of the windshield. Car looked pretty sick. Haven't seen to many nice mustangs around here and ft hood. Mainly to many people that don't know what looks good but then again...

So I'm working on adjusting my tune and ever sense I got my car back I noticed that there is a split in the short terms at idle and when the car isn't in boost and at very very light load while cruising. Wondering if this is because of the design of the edelbrock kit and I need to adjust and one...

I'm working on adjusting my tune and I'm noticing allot of knock under lower load in the 2250-3500 rpm range. The knock really only appears to happen when i'm between .30 and .40 load. I know having long tubes can sometimes give you some false knock readings and i've heard that superchargers...

Wondering of anyone has or is willing to share their sct edelbrock tune with me or maybe a base values file for the edelbrock. I'm working on redoing the tune in my car being it appearing the original base values file was that of the Kenny bell. Let me know what you have and are willing...

Alright so I'm driving down the road a few days ago and i hear this weird ziiiiiipppppp ping sound followed by nothing. Car still drives fine so i figure maybe a pebble or something got in a rotor or maybe the flywheel somehow. Well tonight i was changing out O2 sensors and i notice a small...

Anyone ever have their Edelbrock start squeeking at low RPMs and idle. I was doing some logs in my car tonight to try to finish up my tune and coming out of a gas station i heard this weird noise and then suddenly the car had a repetitive squeek that is RPM based but only at really low rpms and...

Alright I have the opportunity to get my buddies shaker 1000 setup out of his 06 GT for free and replace my shaker 500 system. This would be absolutely everything from headunit to speakers to amps and the additional wiring that is required to make it all work as well. My question is, is...

Wondering if anyone knows which way I have to adjust this table so that I start tk get the appropriate MPG on my car. I have an e force blower with 60# injectors and my car is saying 26.5mpg but it's alot closer to 15. I'm trying to see if anyone knows which way I have to adjust this table or if...