Search results for query: *

  1. S

    Swervo's TSS billet oil pump gear and VMP supercharger install

    Sorry for the lack of updates. I finished it a while ago. I had to take apart the front of the motor again and retime the cams, then put it back together. I also had to take a massive chunk out of bumper to get it to fit. I had my buddy Stang910 street tune it. She drives like normal under...
  2. S

    Swervo's TSS billet oil pump gear and VMP supercharger install

    I haven't yet. Wanted to get the cam timing fixed before doing it. No update since I was busy with my family for the holidays. I'll start working on it again soon.
  3. S

    Swervo's TSS billet oil pump gear and VMP supercharger install

    VMP is for now. I started it up this friday to finish "burping it" and now it's posting a code P0017 and P0308. I just hope I dont have to take the engine apart again. Thanks man.
  4. S

    Swervo's TSS billet oil pump gear and VMP supercharger install

    Sorry for the lack of an update as I haven't really had time to really do anything. I finally got it up and running and took her for a spin around the block to get it up to temp and make sure everything was working properly. Haven't really got on it since I was in a small subdivision...
  5. S

    Swervo's TSS billet oil pump gear and VMP supercharger install

    Back in 2010, I drove from NC to San Diego. Was stationed there for 2 years, then put the stang in storage and went overseas to Japan for another 2 years. Now I'm stationed back here in NC.
  6. S

    Swervo's TSS billet oil pump gear and VMP supercharger install

    That's the one I used.
  7. S

    Swervo's TSS billet oil pump gear and VMP supercharger install

    Thanks. I couldn't just grind down the cover and put it back all ugly. I would do cams too, but the supercharger broke the bank for me.
  8. S

    Swervo's TSS billet oil pump gear and VMP supercharger install

    Hey guys, this is a thread to show my progress of my TSS oil pump gear and VMP supercharger installation. This is the first time I've ever done this and I only have a few hours to work on it a day and I'm taking my time. The tear down of the engine wasnt too bad, but the electrical clips on...
  9. S

    The PIC WHORE CLUB!!! Knock before you Enter!!!

    Thanks. :beerchug2:
  10. S

    The PIC WHORE CLUB!!! Knock before you Enter!!!

  11. S

    Lowered On 20's? Post Your Pics!

    I used instagram, but really didnt do too much enhancing at all. Just walking up in person the reflection was really visible.
  12. S

    Lowered On 20's? Post Your Pics!

    Took this pic after sitting over night in the parking lot while I was on duty.
  13. S

    Lowered On 20's? Post Your Pics!

    Been back in the states for a month and a half and did a few suspension mods to mine. Ground control coilovers, white line front and rear sway bars, wattslink and LCAs plus Wilwood Brakes. Wheels are Forgestar F14s 20x9 20x11 with Nitto Invo 275/35/20 and 315/35/20. I've had that set up for a...
  14. S

    Midniteblue's Grabber 5.sl0w Build Thread

    Looks great man.
  15. S

    S197 Discount Code!

    Hi Jarrod, can I also get the discount code.
  16. S

    My trip to Okinawa's Churaumi Aquarium

    We got to go above the aquarium to see down into the tank. Here's a pic of one of the side panels of the tank. A big ass squid Outside of the aquarium there are other places to see. Here are some pics of sea turtle beach. They also have a dolphin show which happens every 2 hours for...
  17. S

    My trip to Okinawa's Churaumi Aquarium

    Hey guys, just wanted to share some pics of the Churaumi Aquarium on Okinawa that I went to today. If you ever come to Okinawa, make sure to stop by this place, because it's awesome. These pics were taken with my iPhone, I'm waiting for my stuff to get here to use my better camera and...
  18. S

    Did anyone try the bassani lt headers? 2011+

    I really cant compare the quality of others, since I've never held them in my own hands except for ARH headers I had on my Mach 1. The headers are very good quality with nice welds. The fit was perfect. Here's a vid with pics and cats installed. http://www.youtube.com/watch?v=qeiHyE-w1vQ...
  19. S

    Did anyone try the bassani lt headers? 2011+

    I have Bassani longtubes. They fit pretty well and quality is pretty good.
  20. S

    2011 Workshop Manual

    Can you tell me the torque specs for the pressure plate and flywheel?
  21. S

    WOW! I want to go here! Kuroshio Sea in Okinawa.

    I'm going there this summer. I'll be sure to check it out.
  22. S

    New Saleen Grill Install

    I used plasti-dip.
  23. S

    New Saleen Grill Install

    I got frustrated with mine and just clipped the 4 tabs off.
  24. S

    asianskater91's slammed white s197:D

    Looks great!
  25. S

    took some pics today.

    Was a beautiful day today so I went out and took some pics. I also manned up and bought a new camcorder so here's a better vid of my exhaust. http://www.youtube.com/watch?v=i6MedyOe0A8&feature=g-upl&context=G26ed711AUAAAAAAAAAA

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top