Search results for query: *

4.6L/5.4L/5.8L HIGH VOLUME OIL PUMP W/ PICK UP This pump appears to have the steel backing plate

For quite a while now I have been curious to know if BMR's new CB004 Chassis Brace/Radiator Support would fit my 2005 S197. I am currently using BMR's KM011 K-member (1/2" Lowered Motor Mounts with Standard Rack Mounts) and RS002 Radiator Support. The RS002 won't accomodate the new CB004 Chassis...

How many of you are using Fore Innovation's 3V Fuel Rails and Extended OEM Fuel Line Adapter & Crossover Kit with a returnless fuel system? Any fitment or performance issues in any application? More specifically, how about with a Saleen S/C? PS: Not asking about Fore Performance 3V fuel rails.

So I have installed several Saleen Series VI S/Cs, some with stock lids and most with ported lids. I've also installed a few Saleen Series VI.5 S/Cs with stock lids. However I've never been able to perform a before & after comparison of a Series VI S/C with a ported lid to a Series VI with a...

I am planning on purchasing a scanner that has the ability to read generic DTCs, OEM enhanced DTCs and transmission codes. Not necessarily wanting a scanner capable of reading ABS or SRS DTCs, but not out of the question depending on the price. Has anyone used this one...

Replacement Outer Tie Rod End Dust Boots Has anyone found a replacement for just the tie rod end dust boots? I've looked at both Prothane and Energy Suspension and it looks like they don't offer anything year specific after 2004. FWIW the measurements are as follows: Diameter of the tapered...

Afco GT 500 "Pro Series" Dual Pass Heat Exchanger So I've read through all the threads I could find on the Afco GT 500 Pro Series Heat Exchanger w/dual fans. I know several of you have used this heat exchanger on 4.6L 3V 5 or 6-speed vehicles. Is anyone using this heat exchanger on an S197...

Attention Moderators... Before you move this thread because it isn't "Tech", please keep in mind I searched every thread I could find on this topic in this section and others and even though the topic was vaguely mentioned, the actual recommended dimension was never stated and is not...

Is anyone using this oil pan? If so, are you using the OEM windage tray & pan gasket? Canton states this pan will work with the OEM pickup tube.

Been a couple of years since I posted any external pictures - most of my threads are technical in nature and my skills as a photographer leave something to be desired. Lot's has changed in the performance dept. NOTE: As the title of this thread already stated THIS IS A CLONE. Now that we have...

I know I have seen multiple threads on different procedures to drain the fuel from the tank, but for the life of me I can't find them. Perhaps I'm using the wrong search criteria. I'm trying to find the procedure to drain old fuel from my tank. I really don't want to pull the pump as I've...

Already read every thread I could find on the subject... For those of you that already have one, please give me some suggestions of what to look for or stay away from, as well as your personal installation experiences - good or bad. Roll bar will be bolt in, have driver's & passenger's side...

This thread is intended to be an open invitation/request for all S197 owners to post a complete list of their performance mods and mods which directly support performance mods. It is not intended to include appearance mods which do not enhance performance. So please do not include items like...

I recently worked on (2) S197 GTs (08 & 09), neither one was mine, that had 4" one piece drive shafts installed. Same complaint with both vehicles - rubbing or scraping noise under hard launch. Common to both vehicles was the Metco front DSL. I've run into this before as I use the Metco front...

So my wife comes home yesterday in her 06 GT and calls me out to the car. The headlamp switch was in the "on" position (fogs also on) and you could not push the knob in to turn off the fogs, nor could it be turned CCW to the off position. So I grabbed a pair of pliers and convinced the switch to...

Can anyone tell me why when you reconnect the battery cable to the battery on our S197s the horn honks? This must be normal because every one I've ever worked on does it. I've tried to locate where this horn is mounted because it doesn't sound like the same horn that honks when you press the...

I know this topic has been covered many times, but some of the guys that are new to Saleen Series VI & VI.5 superchargers may not be up to speed. Rather than posting pictures I made this easy to follow hose diagram.

5.0L ENGINE - METALLIC RATTLE OR SCRATCHING TYPE NOISE FROM FRONT OF LEFT HAND CYLINDER HEAD AT IDLE - BUILT ON OR BEFORE 3/31/2011

Recently there has been a couple of threads discussing max blower RPM as it relates to Std, 10%, 15% & 18% OD crankshaft pulleys. Thought I would share a auto calculating Excel spread sheet I use for this exact issue. This spread sheet is very simple to use - all you need to do is plug in...

First off let me say this redesigned product (now fits 2005 - 2012 vehicles) is first class along with BMR's Customer Service. I can't say enough good things about Kelly as he patiently answered all my questions - even the stupid ones. Rather than posting a Taco Bill style step by step...

So in preparation to install my new redesigned BMR Xtreme Anti-Roll Bar, the CHE Axle Brace had to go. Rather than just throw the CHE Axle Brace in a corner and let cob webs grow on it, I modified the brace so it will fit with the Xtreme Anti-Roll Bar. Now it doesn't still serve the same purpose...

Latest project: install an NHRA approved battery disconnect Disclaimer: yes I have already searched and read through all 9,281 threads that pertain to NHRA approved battery disconnect switches and I either haven't stumbled across one that answers this question or it's never been discussed...

Can anyone tell me if Thump RRR Racing's PM-2076 76mm billet aluminum idler pulley will fit at the location between the Saleen alternator bracket and front cover?

When I built my 4.6L 3V last year, ARP main studs were not yet sold as a pre-packaged item from ARP. I purchased mine from JDM. However, today I learned that is no longer the case. ARP offers 4.6L 3V main stud sets for engines built with either OEM or non-OEM windage trays. They also offer the...

Today I ordered longer ARP wheel studs for the front hubs & rear axles to accompany my new McGards open end lug nuts. Couple of questions for those of you that have already done this job: When reinstalling the front hub assemblies, did you replace the dust caps as recommended by Ford, or just...