Search results for query: *

Bryan russell Pace, FL [email protected] 251-454-7076 $2200 shipped! Up for sale is an airlift kit for an 05-14. I bought on here for around $2500 and never installed. Parted out most of my mustang and selling it. I will entertain selling just the struts/bags and use the management...

Like the title says, need a 07+ coolant crossover. UD PULLEYS, and any other stock pulleys (removing my 8 rib kit and can't locate my stock pulleys (somewhere in storage). Also need a CAI, would love to find a WMS, but won't be picky Also a BBR GT500 t/b adapter

Bryan Russell Pensacola, FL GT450 kit $3500 Department of Boost manifold kit M122 ported and welded blower M122 ported elbow GT500 fuel rails (painted black could use touched up) 47lb GT500 injectors GT500 throttle body AFCO HEAT EXCHANGER with aftermarket dual fans from frozen boost. Gt500...

So I had some left over clear dip/ a gallon of a previous custom blue dip and some pearl.... purple base coat. then custom "blurple" dont mind the headlights being crooked, they arent bolted in, just test fitting everything.

Well, It looks like my fuel pump crapped on me before I even got finished tuning the car :( I was running a dual FORD GT supercar set-up I purchased from S&H. Need something that will handle over 600whp. thanks!

So I'm working with Lito on tuning my car. Trying to work through some issues and I'm at a stuck point for my basic expertise on trouble shooting. It's idling around 1000-1100. If I drive it it hiccups and backfires like crazy. Wants to stall when I'm coming to a stop, and if I let it idle in...

So I've got everything working and running and working on the tune with Lito. Car is idling high, I can't find any leaks, but once it gets to operating temp, it wasn't to stall out. I noticed two plugs I have no idea where they go. NO CEL are on. Can you help me with these?

Before foam cannon wash. Karcher 1500psi power washer Chemical guys foam cannon Chemical guys citrus wash mixed with glassworks soap Chemical guys black light 1 coat Chemical guys lava wax 1 coat After foam cannon [/URL Blacklight Let it cure for a full day and...

Found a nice g8 for sale so I decided to get it as a DD. Man this thing is nice. And moves. Previous owner claims it went 11.8. Cammed, long tube exhaust intake and stalled.

So we have been shopping in auburn for a new house and finally found a community we liked! We put an offer on an almost complete spec home! Builder is stone Martin builders. 3226sqft 4 bed 3.5 bath.

Ok so I installed my new motor primed it and put coolant on. I was just about to crank it and then I hear a water leak.... It's coming from between the transmission and block. Any ideas? I thought it may have been a bad gasket in the supecharger manifold... Replaced all of them and still leaks...

I need the shifter mount bracket that holds the shifter to the transmission tunnel, I have the bushing just need the bracket. It's for a tr6060 but I believe they are the same on the tr3650. I gave my old one away with my tr3650 before I realized my new shifter didn't come with one. :(

Bryan russel Daphne, al I have the cervinis side scoops in white $SOLD Stock gt500 heat exchanger (went to afco). 90 shipped

Finishing my motors build and need a cam degree kit to dial in comp thumper cams perfect. My last motor had bent valves and marks on the Pistons that looked as if the valves were hitting

Like title says. Price shipped to 36526

Looking for an 8rib (groove) Harmonic Balancer - SFI certified. and I would be willing to go up to an 10% overdrive. (05 GT 4.6 - supercharger application) I would prefer to buy during labor day sale if you have one! I know Lethal has 10% off! So let me know what you got! Thanks!

running a DOB set-up 2.65" pulley built motor - looking for max hp on the stock m112 eaton. current fuel set-up is 47lb gt500 injectors twin supercar GT pumps fuel pump wire upgrade.

I need replacement crankshaft. I dont want one that needs turned.

Looking for Billet oil pump gears - send me a pm with your price shipped. ready to buy.

So... I am going to start my build process. In the process of ordering parts Current situation 05 GT Vert DOB GT450 set-up 3.65" pulley 47lb injectors Dual GT supercar pumps in stock fuel hat. S&H fuel pump rewire set-up Comp Muthr thumpr cams Comp limiters FRPP lash adjusters and rocker...

Is there any reason I can't just take the cams out pop in the new rocker arms and the put cams back in? I just put new chains on and haven't put it all back together. Or is it a must to rotate the cams and do it that way?

So before I bolt everything back up, I wanted to show some pics and make sure I have the timing done correct on my timing chain replacement. the car does have comp cams and phaser limiters if that makes any difference, my main concern is I couldnt get the driver side mark to line up with the...

Painting my 05 sonic blue vert with plastidip. I have started the base coat of black, and will be finishing with a custom top coat. I have 4 coats done now, and one more to do for the base coat. first coat 2nd coat third coat 4th coat (still drying...

Just a quick tease! Not finished yet.

JEEvfAABKRY Just started knocking, stopped driving it. But I need to fix it ASAP. I unplugged both vct to see if the noise stopped, it didn't. Car has comp mutha thumpr cam switch phaser limiters. Not sure if it's drivetrain or rod knock. It's very loud, only reason I think it may not be...