2005 - 2013 Mustng CPC Battery & Master Cylinder Covers Kit BLOWOUT!!

[slvr08gt]

Pm me a price shipped to 96789. Preferably USPS Priority Mail. Thanks

Nick

 

[Makdaddy]

Could you get any up-close pictures of them installed?

Not untill after my build in April

Sorry

 

[dream07]

I have Classic Design Concepts hood struts and my "California - something" covers rubbed my struts when the hood was shut. It rubbed the paint off my struts and left marks on the plastic covers. Do these have that same issue?

 

[alan0614]

Uploaded with ImageShack.us

2005 - 2013 Battery & Master Cylinder Covers Kit

These covers are the perfect accessory to hide the battery and master cylinder and clean the look of your engine bay.
These attach to the front of the cowl, each using the two of the “factory” plastic clips that fasten the cowl to the firewall. Made of the same durable, OEM grade heat resistant material to perfectly match other factory under hood components.

Special Note:
*To fit GT500 models, some hand trimming is require to provide clearance around the throttle body, otherwise it fits perfectly.
Proudly Manufactured in the USA by CPC

75.00 SHIPPED LOWER 48

Paypal- [email protected]

Any idea what "some hand trimming" really means?

 

[Gabe]

Any idea what "some hand trimming" really means?

Gotta trim your hands to fit in-between the covers and the throttle body so you can get them to snap in

 

[ModifyMyStang.com]

Sending pm's in few,

Only a few Left

 

[LSKILLA]

I need some also! Shipped to 77505

 

[ModifyMyStang.com]

Uploaded with ImageShack.us

2005 - 2013 Battery & Master Cylinder Covers Kit

These covers are the perfect accessory to hide the battery and master cylinder and clean the look of your engine bay.
These attach to the front of the cowl, each using the two of the “factory” plastic clips that fasten the cowl to the firewall. Made of the same durable, OEM grade heat resistant material to perfectly match other factory under hood components.

Special Note:
*To fit GT500 models, some hand trimming is require to provide clearance around the throttle body, otherwise it fits perfectly.
Proudly Manufactured in the USA by CPC

75.00 SHIPPED LOWER 48

Paypal- [email protected]

 

[Hysteria]

Paypal sent.

 

[konablue11gt]

These covers fit my 2011 gt just fine didnt need any trimming ...didnt rub anything no issues at all

 

[ModifyMyStang.com]

Uploaded with ImageShack.us

2005 - 2013 Battery & Master Cylinder Covers Kit

These covers are the perfect accessory to hide the battery and master cylinder and clean the look of your engine bay.
These attach to the front of the cowl, each using the two of the “factory” plastic clips that fasten the cowl to the firewall. Made of the same durable, OEM grade heat resistant material to perfectly match other factory under hood components.

Special Note:
*To fit GT500 models, some hand trimming is require to provide clearance around the throttle body, otherwise it fits perfectly.
Proudly Manufactured in the USA by CPC

75.00 SHIPPED LOWER 48

Paypal- [email protected]

2 Kits left!

 

[ModifyMyStang.com]

Make that 1 KIT IN STOCK!

 

[07s281sc]

PayPal payment sent...

 

[Wicked One]

received mine today. Fast shipping and perfect shape.

As for fitment on MY car there are things to consider if anyone has a similar setup.

The redline hood strut bottom support is in the way, not a major thing, just trim away 1" X 1" and it fits perfect over the master cylinder.

The battery is a different story.

I have an optima yellow top that is mounted on there billet tray on top of the factory, no other way to support it properly that I found. I also have a Kenne Bell 2.6 stage 2 with the large 130mm TB.

The cover needs to be trimmed to clear the TB, not a big deal. But the battery is too high for the cover to sit proper. Idea I have is to come up with a new battery mount or do a relocation.

Other than MY CAR ISSUES, the product and vender did a great job.

Thank you.

 

[ModifyMyStang.com]

Thanks guys!!!! SOLD OUT!

 

[Gabe]

Picked them up this morning from the Post Office (I had missed the postlady yesterday) and installed them, just to promptly remove the master cylinder cover when I realized that the driver-side hood strut hits it and lifts the hood a little on that side so I'll have to trim the cover a bit to make room for the hood strut.
But I still love how they looked installed ... of course I took a pic as soon as they were on ... lol

 

[Redfireshaker06]

That is beautiful man, great looking car

 

[Gabe]

That is beautiful man, great looking car

Thanks man .... I have the master cylinder cover here, waiting to be trimmed and re-installed.
Can't use the Dremmel yet, the GF is still sleeping ... lol


.

 

[Redfireshaker06]

I wish i ordered a set. But was to afraid at how much i would have had to trim with the cdc shaker engine cover

Sent from my MB855 using Tapatalk 2

 

[StangEd]

Subscribing in case you get more in stock at this price