Jim Gilles
Junior Member
- Joined
- May 4, 2021
- Posts
- 8
- Reaction score
- 1
I just purchased my family's first Mustang for my youngest daughter's first car. I have found it to be a perfect first car for my daughter. It has been very easy to work on thus far.
I just found that my front stabilizer bar is 31mm. The two worn out bushings are a 1 3/8 which is 33mm and a 31mm. Yes, I do know how to use calipers.
The 33mm bushing had a plastic shim placed behind it in attempts to make the bushing tighter, which did not work.
The Carfax did state that the Mustang had minor driver side front damage that had been repaired.
I find that the stock bar and bushings for 2008s are 28.6mm and 34mm. Am I correct?
Has anyone ever heard of a 31mm front stabilizer bar for a 2008 4.0 Coupe Deluxe?
I ordered two new factory clamps as the clamps were quite shiny and wallowed out on the inside. Especially the clamp that had the 33mm bushing.
I will most likely be looking for a 34mm bar once my 34mm bushings come in.
I just found that my front stabilizer bar is 31mm. The two worn out bushings are a 1 3/8 which is 33mm and a 31mm. Yes, I do know how to use calipers.
The 33mm bushing had a plastic shim placed behind it in attempts to make the bushing tighter, which did not work.
The Carfax did state that the Mustang had minor driver side front damage that had been repaired.
I find that the stock bar and bushings for 2008s are 28.6mm and 34mm. Am I correct?
Has anyone ever heard of a 31mm front stabilizer bar for a 2008 4.0 Coupe Deluxe?
I ordered two new factory clamps as the clamps were quite shiny and wallowed out on the inside. Especially the clamp that had the 33mm bushing.
I will most likely be looking for a 34mm bar once my 34mm bushings come in.
Last edited: