6R80 Transmission Fluid

[GeorgeInNePa]

Does anyone know what I need to use?

From what I can determine, I need to buy Mercon LV.

Is that correct for a 2011 Mustang 5.0 Auto?

I need a quart or two to do my converter swap next week.

 

[Bullett]

What's the catchcan in ur mods for?

 

[GeorgeInNePa]

What's the catchcan in ur mods for?

It collects the oil in the PCV system, instead of it going into the intake.

 

[Bullett]

Ohhh.. Would u recommend it on a bone stock 5.0?

 

[GeorgeInNePa]

Ohhh.. Would u recommend it on a bone stock 5.0?

Sure, why would you want that in your intake and combustion chamber?

 

[Bullett]

True haha!sorry for no info on ur question I just had to ask because I'm hopefully making the switch! I repped u for the info! Thanks!

 

[VTXFrank]

Does anyone know what I need to use?

From what I can determine, I need to buy Mercon LV.

Is that correct for a 2011 Mustang 5.0 Auto?

I need a quart or two to do my converter swap next week.

NOT trying to be a smartass brother, but shouldn't that be in the owner's manual? Or am I missing something here?

 

[GeorgeInNePa]

NOT trying to be a smartass brother, but shouldn't that be in the owner's manual? Or am I missing something here?

I looked through it, but didn't see it in there. I think they want you to go to the dealer for any service on the trans. The dipstick for it is contained in a plug on the side of the trans. You have to get under the car to check or fill the trans.

Someone did tell me the page it's on. Also I got a link to the 2011 service manual, so the threads I made were worth the time.

 

[stang1971]

i just put my circle d in my car today... mercon v is what it called for.

 

[GeorgeInNePa]

i just put my circle d in my car today... mercon v is what it called for.

Mercon LV (low viscosity) is what the service manual says it takes.

What stall speed did you get? I went 3600-3800, 4C.

 

[stang1971]

Mercon LV (low viscosity) is what the service manual says it takes.

What stall speed did you get? I went 3600-3800, 4C.

2800 i would have went higher but i also have 4.10's

 

[GeorgeInNePa]

2800 i would have went higher but i also have 4.10's

I'm going lower (numerically) with the gears.

 

[Jim Vaccaro]

I'm going lower (numerically) with the gears.

I am very interested in how it drives....