All Brembo brakes the same ?

'14StangGT

forum member
Joined
Aug 7, 2016
Posts
213
Reaction score
0
Location
Haslett, MI
My 2014 GT Has the Brembo brake package.

I was just wondering if there was any difference between the Brembo's on my GT verses ones on the GT500 or BOSS 302 ?
 

AndrewS197

forum member
Joined
Jan 29, 2013
Posts
706
Reaction score
0
Location
Indiana
2014 gt has 4 piston Brembos like the boss 302 and earlier gt500's. 13-14 gt500's have 6 piston Brembos.
 

Shotokan1509

forum member
Joined
Aug 13, 2008
Posts
3,918
Reaction score
85
Location
CT
Earlier gt500's were different in that they are gloss black with white lettering, whereas the Boss/Brembo package were flatblack with red.. but otherwise the same
 

'14StangGT

forum member
Joined
Aug 7, 2016
Posts
213
Reaction score
0
Location
Haslett, MI
Appreciate the info

I would think then, that wheels from Boss or GT500 cars so equipped, should fit my car- if I wanted to use them

Thanks
 

TGR96

el blanco nino
Joined
Feb 15, 2011
Posts
10,353
Reaction score
26
Location
Huntsville, AL
BOSS 302 - No
GT500 - Yes

So, I was like...

Wat8.jpg


Earlier gt500's were different in that they are gloss black with white lettering, whereas the Boss/Brembo package were flatblack with red.. but otherwise the same

Then I was like...

1a5898.jpg
 

oldVOR

forum member
Joined
Apr 9, 2015
Posts
1,769
Reaction score
487
Location
Northern Virginia
The OP did ask was there any difference between his '14 GT Brembo's and those on the BOSS 302 or GT500's.

To his question, no, there isn't any difference between the GT w/Brembo and BOSS 302.
And, yes, there are subtle to major differences between the GT w/Brembo and GT500.
 

kallar68

forum member
Joined
Nov 12, 2012
Posts
53
Reaction score
0
From what I've read the brembo are the same 4 piston fronts from 11-14 on brembo cars and the 12 and 13 boss and 07-12 shelby. The 13-14 shelby are 6 piston.

What I don't know is what's different on the rears. Aren't the brembo cars 2 piston rears?
 

Sky Render

Stig's Retarded Cousin
S197 Team Member
Joined
Feb 24, 2011
Posts
9,463
Reaction score
357
Location
NW of Baltimore, MD
No. Only the '13-14 GT500 have different rear brakes, and on those, the calipers are the same with bigger rotors.
 

kallar68

forum member
Joined
Nov 12, 2012
Posts
53
Reaction score
0
No. Only the '13-14 GT500 have different rear brakes, and on those, the calipers are the same with bigger rotors.
I looked up my 2011 brochure and it says for brembo package the rears are a 2 piston. False advertising? Lol not saying you're wrong just something I've never confirmed.
 

oldVOR

forum member
Joined
Apr 9, 2015
Posts
1,769
Reaction score
487
Location
Northern Virginia
Depends how you look at it, sure, there's two pistons back there, one on either end of the axle assembly.
 

Gabe

Whippled Coyote
Joined
Aug 7, 2011
Posts
8,472
Reaction score
1,577
Location
NC
Brembo calipers on the GT and the Boss:

2014-10-17_spacers01.jpg



Brembo calipers on the '07-'12 GT500:

20160501_brakes19.jpg



Rear calipers on all '05-'14 Mustangs, single-piston units:

20160501_brakes6.jpg
 

Shotokan1509

forum member
Joined
Aug 13, 2008
Posts
3,918
Reaction score
85
Location
CT
No. Only the '13-14 GT500 have different rear brakes, and on those, the calipers are the same with bigger rotors.

I have heard the rear caliper while same general design can have different castings on earlier cars.. basically even swapping to 13/14 mounting bracket the disc may contact the caliper itself. Between the pads I believe, what would that be called the saddle?!... it's been a while, if memory serves correctly there may not even be a part number difference it's just be aware if you're early s197 you MAY have contact if you try the swap.

There is an aftermarket adapter bracket that is not as involved if trying to upgrade those rears, don't know if that is affected by caliper casting
 
Last edited:

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top