*Bogarts w/ MT 28x10.5's*

[ROUSH1711]

These are my 2nd set that I had. I had 2 and had a set made for Turbo Pete. These wheels are actually 10.5" wide, a lttle wide than most and makes them look killer.
What we learned through trial and error is that you have to do the sway bar relocation and on some cars you have to remove the metal tabs on the frame rail and the boots from the shocks. On some car you dont..its weird Turbo Pete put them on his car and the bolted right on after the sway bar relocation...His is a 06 though and mine and the sellers is an 05?????weird
Brandon I was trying to post a pic earlier...
Here they are...exact wheel...

Wait...what..thats what you told me too.So these for sale in this
thread are Turbo pete's former 10.5 wheels? im confused now.
Those are the same pics you told me were mine when I purchased.
So there are three sets of these wheels,not two? mine being the
ones that need the cutting up?

If these being sold here are also 10.5,and they do not require
the all the cutting,then why do mine @10.5?
Were mine the "trial by error" wheels you speak of Dave?

 

[Digital_Synapse]

Wait...what..thats what you told me too.So these for sale in this
thread are Turbo pete's former 10.5 wheels? im confused now.
Those are the same pics you told me were mine when I purchased.
So there are three sets of these wheels,not two? mine being the
ones that need the cutting up?

If these being sold here are also 10.5,and they do not require
the all the cutting,then why do mine @10.5?
Were mine the "trial by error" wheels you speak of Dave?

Uh oh...

 

[BoostedGT480]

Wait...what..thats what you told me too.So these for sale in this
thread are Turbo pete's former 10.5 wheels? im confused now.
Those are the same pics you told me were mine when I purchased.
So there are three sets of these wheels,not two? mine being the
ones that need the cutting up?

If these being sold here are also 10.5,and they do not require
the all the cutting,then why do mine @10.5?
Were mine the "trial by error" wheels you speak of Dave?

I'm pretty sure he meant that the ones I bought were 1 of 3 sets that he had (2 sets + a custom set for turbo pete). Dave wouldn't rip anyone off. Ive been to his house several times since he is local to me. Im pretty sure both sets are 10.5". If your unsure, just go measure the wheel

He mentioned these are 10.5 because in my first post, I listed them as 15x10. Also, he posted the same pics because both sets were the exact same wheel. 15x10.5 Bogart GT's

 

[ROUSH1711]

I'm pretty sure he meant that the ones I bought were 1 of 3 sets that he had (2 sets + a custom set for turbo pete). Dave wouldn't rip anyone off. Ive been to his house several times since he is local to me. Im pretty sure both sets are 10.5". If your unsure, just go measure the wheel

He mentioned these are 10.5 because in my first post, I listed them as 15x10. Also, he posted the same pics because both sets were the exact same wheel. 15x10.5 Bogart GT's

First no one claimed that Dave ripped anyone off.
I know Dave for years as well.Lets leave that there.

I'm simply asking,why mine require all the cutting when
yours do not.Yes,mine are 10.5,as yours from what Im
reading...but yours fit without cutting...why dont mine?
He also told me that mine have the road centers,so Im
simply asking what's..what....nothing more.

 

[Digital_Synapse]

Are the ones you're selling the rear wheels to this setup?
http://www.lethalperformance.com/20...gt-series-drag-package-front-and-rear-p-30412

 

[ROUSH1711]

The ones for sale here are 10.5" wide,not many of
those in the country..maybe 2-3 sets in total..idk lol

The price here cannot be beat for what they are.

 

[BoostedGT480]

First no one claimed that Dave ripped anyone off.
I know Dave for years as well.Lets leave that there.

I'm simply asking,why mine require all the cutting when
yours do not.Yes,mine are 10.5,as yours from what Im
reading...but yours fit without cutting...why dont mine?
He also told me that mine have the road centers,so Im
simply asking what's..what....nothing more.

Gotcha..Wasnt saying you mentioned he was trying to rip you off or anything but I was just putting that out there...Dave is a great guy.

Mine did require cutting, but all the cutting was done already because the previous owner ran race stars and already had everything cut

 

[GI Joe]

Wait...what..thats what you told me too.So these for sale in this
thread are Turbo pete's former 10.5 wheels? im confused now.
Those are the same pics you told me were mine when I purchased.
So there are three sets of these wheels,not two? mine being the
ones that need the cutting up?

If these being sold here are also 10.5,and they do not require
the all the cutting,then why do mine @10.5?
Were mine the "trial by error" wheels you speak of Dave?

WTF are you talking about?

 

[GI Joe]

First no one claimed that Dave ripped anyone off.
I know Dave for years as well.Lets leave that there.

I'm simply asking,why mine require all the cutting when
yours do not.Yes,mine are 10.5,as yours from what Im
reading...but yours fit without cutting...why dont mine?
He also told me that mine have the road centers,so Im
simply asking what's..what....nothing more.

Lets keep the mans thread clean...and pm where needed and appropriate.
I had 3 sets made. Pete got one. The confusion is that Spiro you thought I had 2 sets when in fact "I had 2 sets myself" not one for me and one for Pete. 2 for me and one for Pete.
Also there is no "all that cutting". There is one bracket on the frame rail on each side that comes off.Its easy. No big deal. And the sell already had them off so they worked fine. As I stated on Petes 06 car he did not remove them and they worked. You would have to ask Ford on that one.
All three sets have the road centers.
The pics are not the same. You bought drag radials and the seller has slicks on his. Now stop jacking up the guys thread and go to PM....

 

[GI Joe]

Are the ones you're selling the rear wheels to this setup?
http://www.lethalperformance.com/20...gt-series-drag-package-front-and-rear-p-30412

yes except they have a thicker better center to hold up on street use. about .200 thicker and they are 10.5" You are looking at about $1600 with the slicks

 

[ROUSH1711]

Sorry I ask gents..no biggie Dave. Carry on.
The way this thread reads,it sounds like the
sellers bolt on,I was just curious about my
wheels...sorry.

 

[ROUSH1711]

The pics are not the same. You bought drag radials and the seller has slicks on his. Now stop jacking up the guys thread and go to PM....

You posted pics of drag radials,and bogarts.
So with all due repsect, I asked with humor..
No need for the tension and the WTF dave.

 

[Big50]

Damn would have loved to see this before I spent $400 on et streets for my 17's. I would have spent the extra cash to get as set like this.

 

[BoostedGT480]

Sorry guys...Im taking these off the market. I found a way to help finish my build without having to sell these. I love them to death and will not find a better setup so selling would only hurt me in the long run since I would have to repurchase them....If I have to come up with some more money again, I will put something else up for sale.

 

[Digital_Synapse]

Sorry guys...Im taking these off the market. I found a way to help finish my build without having to sell these. I love them to death and will not find a better setup so selling would only hurt me in the long run since I would have to repurchase them....If I have to come up with some more money again, I will put something else up for sale.

Damn man that's so crappy. I sent you a PM with my phone number. I was already gonna order the front and buy yours.

 

[BoostedGT480]

sorry man... It would just suck to sell them now to help pay for the build and then end up paying for them again later on which will cost me even more money...