boss trans cooler fitment

[stang389]

Hey guys, i was wondering if anyone has installed the 2012-13 boss trans cooler on a 2005-2010 car? if so is there any modifications that had to be made to it?

 

[stang389]

nevermind figured it out it wont

 

[zquez]

Actually it will... You just have to buy bolts and nuts and then install it.


Check out this write-up TOB on SVTperformance.com did

http://www.svtperformance.com/forums/svt-shelby-gt500-150/814490-boss-transmission-cooler.html#post11322474

Mine is sitting in the garage waiting for me to make a trip to the hardware store.

 

[warpig12354]

How does that cool the transmission?

 

[zquez]

How does that cool the transmission?

It directs passing airflow from under the car directly onto the transmission case. During testing with it on the Boss 302S in Homestead, it showed approximately a 20* reduction in temperature. It of course will not substitute a TRUE cooler, but it is a nice piece for the weekend track junkie street car.

 

[stang389]

im going to look tomorrow by i dont believe i have the ability to mount this to my camber, i will obviously verify tomorrow- my car is and early 07 car

 

[zquez]

I have an 06 and it fits. Do you have an aftermarket K member?

 

[stang389]

no have the factory one, i have a lower control arm brace(bmr) installed, will this bolt behind that?

 

[zquez]

no have the factory one, i have a lower control arm brace(bmr) installed, will this bolt behind that?

It replaces it. Its essentially the factory brace with a little scoop welded on

 

[stang389]

mine bolts from underneath- the bolts go north to south not east-west

 

[Grabber5.sl0w]

If you're lowered prepare to scrape everything. It's even lower than the front end. Mine hardly has any paint left on the front.

 

[zquez]

Heres a pic of it installed. I assume that what you mean by north to south