captdistraction
Corner Carver
Stock 2011 Yellow Blaze hood with Boss 302 "center blackout decal". Includes mounting studs/nuts, insulator pad and washer nozzles, but the front striker ( part 8L5Z-16K689-A -$10) has been removed. Paint has very minor chips among leading edge from highway use, paint 8.5/10. Honestly to me the paint is even better as yellow blaze really does an excellent job of hiding wear. It is clean and polished/waxed. $500 obo. + freight.
dirty pic of hood before I cleaned it up:
http://www.chris-wynne.com/forsale/IMG_2532.jpg
Detail of paint condition:
http://www.chris-wynne.com/forsale/IMG_2535.jpg
http://www.chris-wynne.com/forsale/IMG_2536.jpg
MMR Oil Filter relocation kit - $200
I'm selling this as I'm having a hard time finding room on my car's setup (and I might switch to a sandwich plate). However, the kit is awesome looking. Included are two body adapters, custom machined from aluminum (one F150 5.0, and one GT/Boss Coyote) with integral rubber Orings and -10AN ports. Also included is a moroso remote filter mount with -10AN ports and a 1/2" NPT port for sensors. I have at least two fittings for the adapter (pictured) and may have some more which I will include at this price. Just find -10AN line and you're set. Includes Ford motorcraft filter.
Magnaflow competition catback: (I'm unsure of the exact part number of mine as it was a prototype kit)
3" Stainless catback with all mandrel bends, altered and fitted by magnaflow for extra clearance on cars that were lowered. Minor discoloration of pipes from use, I'll take the time to polish it all up. Sounds fantastic (removed as its too loud for me without cats and I want to try another setup). $500 obo + shipping
http://www.chris-wynne.com/magnaflowtrip/magnaflow-22.jpg
http://www.chris-wynne.com/magnaflowtrip/magnaflow-18.jpg
More as I find it:
Stock gauge faces, 2011GT - $20
Stock rear valence (not bumper cover), black plastic portion $40 + shipping
Stock 2011 GT Exhaust cams -$40
Stock 2011 GT H pipe, sans cats - $40
Shipping will be a bit slower during the holidays, please feel free to pm questions or quotes on shipping. Will trade for go fast parts or seats. Feedback/references available.
bump with images and some new parts:
dirty pic of hood before I cleaned it up:
http://www.chris-wynne.com/forsale/IMG_2532.jpg
Detail of paint condition:
http://www.chris-wynne.com/forsale/IMG_2535.jpg
http://www.chris-wynne.com/forsale/IMG_2536.jpg
MMR Oil Filter relocation kit - $200
I'm selling this as I'm having a hard time finding room on my car's setup (and I might switch to a sandwich plate). However, the kit is awesome looking. Included are two body adapters, custom machined from aluminum (one F150 5.0, and one GT/Boss Coyote) with integral rubber Orings and -10AN ports. Also included is a moroso remote filter mount with -10AN ports and a 1/2" NPT port for sensors. I have at least two fittings for the adapter (pictured) and may have some more which I will include at this price. Just find -10AN line and you're set. Includes Ford motorcraft filter.
Magnaflow competition catback: (I'm unsure of the exact part number of mine as it was a prototype kit)
3" Stainless catback with all mandrel bends, altered and fitted by magnaflow for extra clearance on cars that were lowered. Minor discoloration of pipes from use, I'll take the time to polish it all up. Sounds fantastic (removed as its too loud for me without cats and I want to try another setup). $500 obo + shipping
http://www.chris-wynne.com/magnaflowtrip/magnaflow-22.jpg
http://www.chris-wynne.com/magnaflowtrip/magnaflow-18.jpg
More as I find it:
Stock gauge faces, 2011GT - $20
Stock rear valence (not bumper cover), black plastic portion $40 + shipping
Stock 2011 GT Exhaust cams -$40
Stock 2011 GT H pipe, sans cats - $40
Shipping will be a bit slower during the holidays, please feel free to pm questions or quotes on shipping. Will trade for go fast parts or seats. Feedback/references available.
bump with images and some new parts:
