Currently am eyeing up another project so this could possibly be for sale if my number is hit. Car is located about 30 minutes north of Pittsburgh, PA
2012 Shelby GT500 Black with Red Stripes
6200 miles, paint is absolutely flawless.
Priced fair with it's current modifications
$48,500
Not only does it perform well at the drag strip, she also places in every major car show I've entered her in.
This car has the basic Shelby options, which are Brembo's, Shelby Seats, Shaker 500, HIDs etc. It does not have the additional options like Navigation, SVTPP etc as I knew I was going to mod the suspension etc from the get go.
Car made 746rwhp/679tq and runs low 10's at mid 130's, still has a lot left in it.
Modifications:
Engine
Whipple 2.9 w/3.0 Pulley
FRPP Super Cobra Jet Mono-Blade Throttle Body
127mm CAI
72lb Injectors
Dual Competition Boost-a-pump
AFCO 11" Dual Pass Heat Exchanger w/Dual 10" SPAL Fans
3x Capacity Heat Exchanger Fluid Reservoir
Steeda Motor Mounts
NGK BR7EF Plugs @ 0.028 gap
Exhaust
Dynatech 1 7/8" Long Tube Headers
3" Off-road Dynatech X-pipe
Flowmaster Hushpower Axle-back
Suspension/Driveline
Tokico D-Spec Adjustable Shocks and Struts
BMR Lowering Springs
BMR Lower Control Arm Relocation Brackets
BMR Adjustable Panhard Bar
UMI Poly/Roto-Joint Lower Control Arms
DSS Single Piece Aluminum Driveshaft
BMR Front Driveshaft Safety Loop
Welded Axle Tubes
MGW Shifter
CHE K Member Brace w/Torque Limiters
Wheels/Tires
Forgestar CF5 20x9.5 with Brand new Nitto NT555 275/35/20 on the front
Forgestar CF5 20x11 with ~85% life Nitto NT555R Drag Radial 305/35/20 on the rear
Computer
Custom Tuned
N2MB WOT Box
Feel free and PM me on this board or email me at [email protected] for more information or if you wish to discuss further.
2012 Shelby GT500 Black with Red Stripes
6200 miles, paint is absolutely flawless.
Priced fair with it's current modifications
$48,500
Not only does it perform well at the drag strip, she also places in every major car show I've entered her in.
This car has the basic Shelby options, which are Brembo's, Shelby Seats, Shaker 500, HIDs etc. It does not have the additional options like Navigation, SVTPP etc as I knew I was going to mod the suspension etc from the get go.
Car made 746rwhp/679tq and runs low 10's at mid 130's, still has a lot left in it.
Modifications:
Engine
Whipple 2.9 w/3.0 Pulley
FRPP Super Cobra Jet Mono-Blade Throttle Body
127mm CAI
72lb Injectors
Dual Competition Boost-a-pump
AFCO 11" Dual Pass Heat Exchanger w/Dual 10" SPAL Fans
3x Capacity Heat Exchanger Fluid Reservoir
Steeda Motor Mounts
NGK BR7EF Plugs @ 0.028 gap
Exhaust
Dynatech 1 7/8" Long Tube Headers
3" Off-road Dynatech X-pipe
Flowmaster Hushpower Axle-back
Suspension/Driveline
Tokico D-Spec Adjustable Shocks and Struts
BMR Lowering Springs
BMR Lower Control Arm Relocation Brackets
BMR Adjustable Panhard Bar
UMI Poly/Roto-Joint Lower Control Arms
DSS Single Piece Aluminum Driveshaft
BMR Front Driveshaft Safety Loop
Welded Axle Tubes
MGW Shifter
CHE K Member Brace w/Torque Limiters
Wheels/Tires
Forgestar CF5 20x9.5 with Brand new Nitto NT555 275/35/20 on the front
Forgestar CF5 20x11 with ~85% life Nitto NT555R Drag Radial 305/35/20 on the rear
Computer
Custom Tuned
N2MB WOT Box
Feel free and PM me on this board or email me at [email protected] for more information or if you wish to discuss further.
Last edited:
