HID Install help.

[Blackballed]

Hey all, I did a search on the topic but didn't help much. I have just bought a HID kit with 2 ballast. It is just a low beam kit. i have everything together and I have a black ground and a red positive to hook up to the headlight connector. My question is there are three ports on the headlight connector and I know that the Black wire is the ground and I need to know which to connect to the positive is it the green wire or the white? I tested both and both the green and white were both hot. Any help would be great.

 

[Blackballed]

I can post pics if necessary.

 

[Captainstr8edge]

usually one is for low beam and the other high, plug it in to one and see if it comes on with low or high beam and switch if you need to. thats what I would do.

 

[Blackballed]

Thanks man. I am going to work on it this afternoon. I'll let ya know how it turns out.
Bill

 

[allinon72]

Drivers side:
White is low beam
Purple is high beam
Black is ground

Passenger side:
Green is low beam
Yellow is high beam
Black is ground