My Parts Thread

[BadPiggy]

Steve,
I could use FRPP Head Gasket Kit for 5.0 BOSS block.
The part number is the same as the 4.6...except change the 46 in the part number to 50.

Don't really need bolts, but PM prices both ways...head gaskets...then head gasket kit.
Thanks!

Also, there is a FRPP Dowel/Plug kit.
Price that, too?

 

[Steve@Tasca]

Steve,
I could use FRPP Head Gasket Kit for 5.0 BOSS block.
The part number is the same as the 4.6...except change the 46 in the part number to 50.

Don't really need bolts, but PM prices both ways...head gaskets...then head gasket kit.
Thanks!

Also, there is a FRPP Dowel/Plug kit.
Price that, too?

Boss head gaskets are a bargain, $40.00 for the pair plus shipping so if you don't need bolts this is the way to go.

FRPP doesn't have a dowel/plug kit for the Coyote, only for old pushrod stuff and older Modulars. What exactly do you need?

-Steve

 

[BadPiggy]

Boss head gaskets are a bargain, $40.00 for the pair plus shipping so if you don't need bolts this is the way to go.

FRPP doesn't have a dowel/plug kit for the Coyote, only for old pushrod stuff and older Modulars. What exactly do you need?

-Steve

M-6026-CI46
These are freeze plugs, dowels & the plastic water hose thingy where the water pump is.

 

[Steve@Tasca]

M-6026-CI46
These are freeze plugs, dowels & the plastic water hose thingy where the water pump is.

Right, those are for the older Modulars. Is that what you're working on? Maybe I'm confused because you're asking about Boss head gaskets.

-Steve

 

[BadPiggy]

Right, those are for the older Modulars. Is that what you're working on? Maybe I'm confused because you're asking about Boss head gaskets.

-Steve

It's a BOSS block.
I don't really need the freeze plugs.
Just the head & trans dowels and the water pump plastic plug.

Maybe I need to get the number off the block, first?
Then you tell me exactly what I have?
I was under the assumption I had a 3V BOSS block...but now you're throwing the COYOTE word out there...so now I'm getting confused.

 

[BadPiggy]

Didn't mean to dirty up Rpm's parts thread, so I'm starting my own.

Steve,
Here's the For Sale ad of the short block I purchased.
Hopefully this will help you better know what I'm needing.
This is supposed to be a 3V BOSS block.

Head Gaskets (FRPP preferably)
Dowels (head & trans)
Water Pump plastic plug thing w/o-rings

If you need the part number off the block, I can get you that later tonight.

http://www.s197forum.com/forum/showthread.php?t=107014

 

[Steve@Tasca]

It's a BOSS block.
I don't really need the freeze plugs.
Just the head & trans dowels and the water pump plastic plug.

Maybe I need to get the number off the block, first?
Then you tell me exactly what I have?
I was under the assumption I had a 3V BOSS block...but now you're throwing the COYOTE word out there...so now I'm getting confused.

No, I think I have it figured out now. The problem is with Ford Racings wording and the fact that I deal with SO may Coyote guys now.

You have the old modular M-6010-BOSS50 Boss 5.0 block from FRPP and I thought you were asking for 2012+ Boss 302 head gaskets.

I'm a little slow on the uptake today, sorry.

You need the M-6067-3V50 head changing kit for $299.20 and the M-6026-CI46 for $22.00. As far as I know there's is no other way to get those head gaskets.

I should be able to have both within a week or so.

-Steve

 

[Steve@Tasca]

I'm a little slow on the uptake today, sorry for the confusion in the other thread.

I think I have it figured out now. The problem is with Ford Racings wording and the fact that I deal with SO may Coyote guys now.

You have the old modular M-6010-BOSS50 Boss 5.0 block from FRPP and I thought you were asking for 2012+ Boss 302 head gaskets.

You need the M-6067-3V50 head changing kit for $299.20 and the M-6026-CI46 for $22.00. As far as I know there's is no other way to get those head gaskets.

I should be able to have both within a week or so.

-Steve

 

[BadPiggy]

Steve,
All the parts I ordered last Friday have been received.
Thanks for the fast shipping and great pricing.
I'll be calling for more, soon...I'm sure.

 

[Steve@Tasca]

Steve,
All the parts I ordered last Friday have been received.
Thanks for the fast shipping and great pricing.
I'll be calling for more, soon...I'm sure.

Glad to hear it, thanks for the positive feedback!!

-Steve