Post your best 1/4 MILE ETs here!

[psfracer]

Thats it?

 

[05stroker]

Thats it?

Hahahaha, LMAO! Yes, that is all...

 

[Fabman]

: Engine
· 05 up Ford aluminum block
· Manley 18cc dish pistons 9.0/1 .030 w/ ceramic coated tops and dry film coated skirts
· Manley Billet Pro Series rods coated w/ PD14
· Kellogg 3.75 stroker crank coated w/ PD14
· Federal/Mogal Race series bearings dry film coated
· ARP 3v head studs
· ARP 3v main studs
· Livernois vct lockouts
· Comp Cams 127550 cams
· Comp. Beehive springs moly coated with titanium retainers
· Ported heads with 35mm in. and 38.5mm ss valves with all ports, chambers, and valves ceramic coated
· Steeda delete plates
· MMR windage tray
·Ford GT500 oil pump w/ TSS billet gears
· Ford head gaskets
· New Ford timing chains, guides, and 2v tensioners
· Moroso 7qt. oil pan coated with PD14 inside
· MEZIERE elec water pump
· Autolite HTO plugs
· Innovators West Balancer with custom Procharger crank pulley and crank support
· MSD COPs
· MSD dual Dis 4 setup w/ 2 step and ign. Kill
· JPC sheet metal intake urethane coated by Polydyn
· FRPP polished throttle body
· Crank case evac. System and Morso breather tanks
· Remote oil filter
· Rear head coolant mod

: Power adder
· Procharger F1a with 12 rib pulley .Blower inlet and all piping ceramic coated outside and PD14 coated inside
· Procharger Red Race valve and 44 mm wastegate
· Procharger 800 hp intercooler
· Custom 4” CAI with filter located under headlamp
· Custom Billet 12 rib setup
· HSW N2O wet kit with polished bottle, bottle opener, perge, blow down tube, Microedge, and all black and silver ends

: Engine compartment
· Derale 16 pass oil cooler
· Derale 4 pass PS cooler
· Battery relocated to trunk , mounted in polished alum box


: Exhaust
· ARH ceramic coated headers 1 3/4 tubes w/ 3” collectors
· ARH 3” O/R x-pipe ceramic coated
· Magnaflow 3”cat-back

: Fuel system
· Fore return triple pump hat with 3 Ford GT pumps
· FRPP 62mm TB
· Fore fuel rails
· Simem Deka 80lb injectors

: Transmission
· Lentec Strip Terminator w/ TB and AVB
· Lentec Billet 3800 stall
· Trickflow alum. Pan
· Duel Derale 16 pass trans coolers
· Outlaw shifter
· 1 pc. Steel driveshaft w/ Chromalloy yoke and flange

: Rearend
· Ford 8.8
· FRPP 3:73 gears
· Detroit True Track
· 04 style pinon yoke
· Moser 31 splineaxles
· Moser rear cover with bearing supports
· Welded tubes
· C-clip eliminators

:Tires
· Front tires : BFG G-Force 245/40zr/20
· Rear tires : Nitto NT05 315/35/20

: Suspension
· Totico D-Spec adj. shocks
·Eibach Sportline springs
· BMR adj. UCA
· BMR LCA
· BMR LCA relocation brackets
· BMR adj. panard bar
· BMR panard relocation bracket
· BMR panard brace
· BMR k-member
· BMR tubular a-arms with updated bushings
· BMR rear extreme anti squat
· BMR boxed sub-frame connectors
· BMR upper poly bushing

: Brakes
· Bear 14” rotors
· Hurst line lock
· Braided SS lines

: Interior
· Custom 5pt roll bars with removable side bar
· RCI 5 pt. harness
· Custom switch panel in console for
N2O arm
Dash controls
Ign. Cut off
O/D arm
Perge
Bottle opener
N2O gauge
Microedge controller
AEM Trueboost

· Autometer gauges
Trans temp.
Water temp
Oil Psi.
Fuel Psi
W/B
Tach with shift light

THANKS!

 

[05stroker]

THANKS!

Stay tuned.

Still lots to come this year...

 

[Fabman]

Stay tuned.

Still lots to come this year...

heh-heh...he said "Tuned"....

 

[05stroker]

heh-heh...he said "Tuned"....

LOL!

 

[sharkbaits]

Just wanted to update our N/A Times in our red coyote stock car-

http://www.youtube.com/watch?v=ML1KZEUhn0Y

2) The following vehicle information:
- 302
- 4v Coyote Sealed Stock Engine
- MT ET Drag

 

[Mike K]

Damn that's quick!

 

[555]

Nice

 

[Fabman]

Just wanted to update our N/A Times in our red coyote stock car-

http://www.youtube.com/watch?v=ML1KZEUhn0Y

2) The following vehicle information:
- 302
- 4v Coyote Sealed Stock Engine
- MT ET Drag

Wow....VERY impressive.

 

[05stroker]

Nice 60 ft there!

 

[69Mach1-409]

Now that's moving!

 

[psfracer]

Just wanted to update our N/A Times in our red coyote stock car-

http://www.youtube.com/watch?v=ML1KZEUhn0Y

2) The following vehicle information:
- 302
- 4v Coyote Sealed Stock Engine
- MT ET Drag

What is the minimum weight for this class? That is really impressive when you realize that is a stock 5.0.

 

[DeepImpactPony]

Dam! Thats saweeet!! Awesome times! Gotta love this new coyote!

 

[Fabman]

Very impressive....some fast mustangs on this thread.

 

[beefcake]

302 Cubic Inch
6r80 Automatic
Vortech YSI
27 PSI
3.31 Gear
275/60/15 MT Drag Radial

 

[05stroker]

New PB

New best today on the 20" drs!

Lots of headwind (20 mph) so the MPH was down but, you get the idea. LOL

 

[Clipboard]

302 4v coyote
N/A no mods
3.55 gear
mt82 m6
335/50/18 perelli

 

[brianadams03]

New pb:
12.03 @ 117.16 w/ 1.65 60'.
Mods:

302 4v coyote
N/A(mods below)
3.73 gear
mt82 m6
Hoosier QTP'S 27x10.5x15
Mods:
--Boss 302 Intake Manifold
--JLT CF CAI
--93 Lund Tune
--GT500 ab's
--Lethal O/R X-pipe
--Mach 600 Clutch
--SR Short throw shifter
--Dark stars w/ Hoosier QTP'S 27x10.5x15

 

[05stroker]

New best today on the 20" drs!

Lots of headwind (20 mph) so the MPH was down but, you get the idea. LOL

Little video to go with the slip.