don_w
Dyno Numbers - Who Cares?
For your time to be added to the Official ET Ranking List, you will need to post the following:
1) copy of timeslip--if you don't have it, unless you have video, forget it. If you only have video, please provide the 60', 1/8-mi and 1000' incrementals
2) The following vehicle information:
- Cubic inch displacement (CID) of engine
- Type of transmission (by model number)
- Size and Manufacturer of power adder, or N/A
- Pounds of Boost, of N2O shot (or both if applicable)
- Rear Gear ratio
- Make and type of tire
3) your time also has to be backed up by another time within 2%.
==========================================================
Just to help get things moving, here are my personal bests in the 1/8-mi and 1/4-mi. Keep in mind that most of my racing is done at two local 1/8-mi tracks. Over the past 7 months, 370 runs have been in the 1/8, and only 5 in the quarter. Anyway, my best runs are:
Best 1/8 mi (1/27/07): 7.084 @ 98.113, 60' = 1.551, DA =1788' Click for Video
Best 1/4 mi (10/22/06): 11.472 @ 114.97, 60' = 1.618, 1/8 = 7.269 @ 93.65, DA=3058' Click for Video
1) copy of timeslip--if you don't have it, unless you have video, forget it. If you only have video, please provide the 60', 1/8-mi and 1000' incrementals
2) The following vehicle information:
- Cubic inch displacement (CID) of engine
- Type of transmission (by model number)
- Size and Manufacturer of power adder, or N/A
- Pounds of Boost, of N2O shot (or both if applicable)
- Rear Gear ratio
- Make and type of tire
3) your time also has to be backed up by another time within 2%.
==========================================================
Just to help get things moving, here are my personal bests in the 1/8-mi and 1/4-mi. Keep in mind that most of my racing is done at two local 1/8-mi tracks. Over the past 7 months, 370 runs have been in the 1/8, and only 5 in the quarter. Anyway, my best runs are:
Best 1/8 mi (1/27/07): 7.084 @ 98.113, 60' = 1.551, DA =1788' Click for Video
Best 1/4 mi (10/22/06): 11.472 @ 114.97, 60' = 1.618, 1/8 = 7.269 @ 93.65, DA=3058' Click for Video
Last edited: