Post your best 1/4 MILE ETs here!

[MLC40]

Time Slips

Stock long block 281 CID, 4R70W, Kenne Bell 2.6L, 11 pounds of boost, 4.10, MT 295/55/15

 

[Noclutch]

Thanks man, congrats on your 12's. Get some drag radials and you will be running 12.70s

Thanks, this years goal was the 12 now next year is see how low I can go NA, more parts yet to go.

 

[beefcake]

[email protected]

11 GT, Vortech 8.75 psi, headers, bigs and littles, a little suspension, alum driveshaft, 6r80, 4.10 gear, et streets

 

[Vapour Trails]

- Cubic inch displacement (CID) of engine - 281 / Stock Longblock
- Type of transmission (by model number) - TR3650
- Size and Manufacturer of power adder, or N/A - Whipple 2.3L
- Pounds of Boost, of N2O shot (or both if applicable) - 11psi
- Rear Gear ratio - 3.55
- Make and type of tire - MT ET Street Radial 275/40/17 DR

http://i198.photobucket.com/albums/aa173/ckempan/IMG_0050.jpg

 

[69Mach1-409]

- Cubic inch displacement (CID) of engine - 281 / Stock Longblock
- Type of transmission (by model number) - TR3650
- Size and Manufacturer of power adder, or N/A - Whipple 2.3L
- Pounds of Boost, of N2O shot (or both if applicable) - 11psi
- Rear Gear ratio - 3.55
- Make and type of tire - MT ET Street Radial 275/40/17 DR

Very nice!

 

[PNR Welding]

Not really moving up, but will be in the next week or two. Turning up the boost next time at the track.

Here is with 20psi.

 

[gmantheman]

My two best runs at Fontana.

 

[BruceH]

For your time to be added to the Official ET Ranking List, you will need to post the following:

1) copy of timeslip--if you don't have it, unless you have video, forget it. If you only have video, please provide the 60', 1/8-mi and 1000' incrementals
2) The following vehicle information:
- Cubic inch displacement (CID) of engine
- Type of transmission (by model number)
- Size and Manufacturer of power adder, or N/A
- Pounds of Boost, of N2O shot (or both if applicable)
- Rear Gear ratio
- Make and type of tire
3) your time also has to be backed up by another time within 2%.

==========================================================

Just to help get things moving, here are my personal bests in the 1/8-mi and 1/4-mi. Keep in mind that most of my racing is done at two local 1/8-mi tracks. Over the past 7 months, 370 runs have been in the 1/8, and only 5 in the quarter. Anyway, my best runs are:

Best 1/8 mi (1/27/07): 7.084 @ 98.113, 60' = 1.551, DA =1788' Click for Video

Best 1/4 mi (10/22/06): 11.472 @ 114.97, 60' = 1.618, 1/8 = 7.269 @ 93.65, DA=3058' Click for Video

1. Best time of [email protected] Back up time of 11.682@122

2. 281 ci.
TR-6060 transmission
2.3 Whipple @ 15 lbs
4.10
Nitto NT05R 305/45/18 @ 20lbs.

 

[vnmous1]

New PB 10.74@128 2007 GT500 factory eaton








M&H Racemaster DRs 325/50/15
17 lbs boost
4.10s

 

[psfracer]

^^^^^What tire, lbs of boost, gear ratio?

 

[Hemih8ter]

Is a 13.64 at 103 decent for a stock vert. on nitto 555's ? hoping to go 12's with a 75 shot.

 

[psfracer]

M&H Racemaster DRs 325/50/15
17 lbs boost
4.10s

Actually my mistake, saw you posted the info on post #1649.


Ok, almost done---since I haven't done this in a month I had 21 updates.

 

[psfracer]

UPDATE SENT TO BIG BOSS MAN 09/26/2010

New Record holders:

Vinny Barber: quickest and fastest 3V on the board
Beefcake: quickest and fastest 2011 302 4V on the board
Armycook1981: quickest and fastest V6 on the board
Spyder7724: quickest n/a 3V (334 cid) on the board
Matt D: quickest and fastest n/a 281 3V on the board
Luillo: quickest and fastest n/a 2011 302 4V on the board

Now there may be faster 2011's out there, but they haven't posted in the ET spreadsheet thread, so those are the record holders for now.

 

[gmantheman]

My tires are M&H Dr vise MT/ET streets. Thanks

 

[boss 245]

12.31@111

car 215

245 ci v6
vortech with 2.62 pulley showing 11 psi
stock trans
3:73's t-loc in a 7.5
M&H 28: DR's

 

[Matt D]

M&H Racemaster DRs 325/50/15
17 lbs boost
4.10s

Nice What springs do you have out back?

 

[GoFaster06]

- Cubic inch displacement (CID) of engine - 281
- Type of transmission (by model number) - 5R55S
- Size and Manufacturer of power adder, or N/A - Whipple 2.3L
- Pounds of Boost, of N2O shot (or both if applicable) - 10psi
- Rear Gear ratio - 3.73
- Make and type of tire - MT ET Street Radial 325/50/15

 

[Vxer1000]

Baseline

- 2010 Mustang GT
- 4.6L 3V
- 5 Speed Manual Tremec 3650
- Naturally Aspirated
- No Power Adders
- 3.73 Gears
- Pirelli P-Zero Nero P235/50ZR18
- Car is stone stock down to the factory air filter


Video - http://www.youtube.com/watch?v=u6d17xC--Wc

 

[GoFaster06]

- Cubic inch displacement (CID) of engine - 281
- Type of transmission (by model number) - 5R55S
- Size and Manufacturer of power adder, or N/A - Whipple 2.3L
- Pounds of Boost, of N2O shot (or both if applicable) - 10psi
- Rear Gear ratio - 3.73
- Make and type of tire - MT ET Street Radial 325/50/15

New Personal Best: 11.291

 

[Fast64ranchero]

- Cubic inch displacement (CID) of engine - 281 / Stock Longblock
- Type of transmission (by model number) - TR3650
- N/A
- Pounds of Boost, of N2O shot (or both if applicable) - none N/A
- Rear Gear ratio - 4.56
- Bo-Port ported heads, comp 127500 cam,
- Make and type of tire - MT ET Street Radial 295/45/17