GallopingFord
I'm Cam - Mr. Indecisive
I lost the love to my beloved 3V a while ago and almost sold the car entirely but deep down knew I would regret selling the car… so I kept it. The car has been sitting for a little over a year now and I have finally settled on a vision for it.
If you are interested in reading my former build of the car, you can find it here:
http://www.s197forum.com/forum/showthread.php?t=60802
Here are pictures of the car through its different looks/phases
December 2009 | When I took delivery of the car.
Summer 2010 – Summer 2011
Summer 2011-Summer 2012
Summer 2012 – Winter 2012
Present 2013
I’ve been through a lot with the car and it’s pretty obvious I have a solid emotional connection with it. I am pretty sure I’ll never get rid of it. Took me a while to come up with a build, and I’m still not done polishing the details, but the big picture is there.
Providing a build thread so many of you can follow along and possibly get ideas and answers towards your own S197 modifications.
Already I need to give a big thanks to Sam (19Cobra93) and Bruce (Boozshey) for answering many of my questions and stimulating my interest in becoming another member in the swap club.
Engine (not finalized): Full GT500 Engine and Transmission swap
-5.4L 4V Iron Block V8 (2007-2009) Production Engine
-FRPP 2013 GT500 8.5 Quart Oil Pan
-2013 GT500 Fan
-Stock Supercharger (for now) with smaller pulley
-Haven’t decided on CAI yet
-Possibly FRPP TB
-Stock Manifolds
-Battery Trunk Relocation
-Mufflers: Stock Bullitt/GTB axlebacks (for now)
Transmission: TR-6060 6-Speed Transmission
-MGW Short Throw Shifter
-1-PC Driveshaft
-BMR DS Safety Loop
-FRPP Clutch Line (M-7512-A)
-2010+ GT500 Clutch and Flywheel
Suspension
KONI Sport (Yellow) Struts and Shocks
FRPP “L” Springs (M-5300-L) – Not finalized
GT500 Strut Mounts (M-18183-C)
GT500 Front LCA Arms (M-3075-E)
2011+ Ford OEM Swaybar Endlinks
BMR K-Member with Stock Motor Height and Stock Steering Rack
BMR LCA + Relocation Brackets
BMR UCA and Mount
BMR Panhard Support Brace
BMR Adjustable Panhard Bar
FRPP Sway Bar Kit (M-5390-A)
FRPP Bump Stop Jounce Kit (M-5570-A)
FRPP 14” Brembo Brake Kit
7/8” Spacers at all corners with Extended Studs
-If I have time I will remove rear axle, remove surface rust and paint it black. Going to swap fluid in the rear too and change out the diff cover.
Appearance: Still working on it.
-Removing washer nozzles on the hood and filling in the holes. Removing washer fluid system all together
-Removing Sirius Sat Wart on the trunk and filling in the holes. Relocating it inside the rear window.
-Removing front antenna on fender and filling in the holes, doing a stealth antenna inside the top of the front windshield
-Removing the window tint. Doubt I’ll reinstall it.
-Stock appearance for the most part with the exception of a couple things. I’d like to keep the overall “muscle car” character of the car intact.
-Reconditioning all exterior plastics and replacing some trims that are either damaged or weathered beyond repair
-Ton of TLC with the paint, new front bumper too.
Interior: Plain/stock
-Reconditioning all the interior trim pieces
-Reconditioning leather interior
-Probably a single aeroforce interceptor gauge
Enough of that though… time for destruction!
Started with the interior. Removed Navigation head unit and will be putting a Shaker 500 back in. I don’t need anything advanced since the car isn’t a DD.
Removed push button start gimmick.
Removed hands free aftermarket system, bunch of wires I don’t need back there.
Guy who installed this system did a hack job putting it in, crap all over the place and not tied down. I need to repair the harness too.
After all removed.
Backseats out and all of carpet trim
Removing sat wart
Removing front antenna
Picture of ole’ faithful
If you are interested in reading my former build of the car, you can find it here:
http://www.s197forum.com/forum/showthread.php?t=60802
Here are pictures of the car through its different looks/phases
December 2009 | When I took delivery of the car.
Summer 2010 – Summer 2011
Summer 2011-Summer 2012
Summer 2012 – Winter 2012
Present 2013
I’ve been through a lot with the car and it’s pretty obvious I have a solid emotional connection with it. I am pretty sure I’ll never get rid of it. Took me a while to come up with a build, and I’m still not done polishing the details, but the big picture is there.
Providing a build thread so many of you can follow along and possibly get ideas and answers towards your own S197 modifications.
Already I need to give a big thanks to Sam (19Cobra93) and Bruce (Boozshey) for answering many of my questions and stimulating my interest in becoming another member in the swap club.
Engine (not finalized): Full GT500 Engine and Transmission swap
-5.4L 4V Iron Block V8 (2007-2009) Production Engine
-FRPP 2013 GT500 8.5 Quart Oil Pan
-2013 GT500 Fan
-Stock Supercharger (for now) with smaller pulley
-Haven’t decided on CAI yet
-Possibly FRPP TB
-Stock Manifolds
-Battery Trunk Relocation
-Mufflers: Stock Bullitt/GTB axlebacks (for now)
Transmission: TR-6060 6-Speed Transmission
-MGW Short Throw Shifter
-1-PC Driveshaft
-BMR DS Safety Loop
-FRPP Clutch Line (M-7512-A)
-2010+ GT500 Clutch and Flywheel
Suspension
KONI Sport (Yellow) Struts and Shocks
FRPP “L” Springs (M-5300-L) – Not finalized
GT500 Strut Mounts (M-18183-C)
GT500 Front LCA Arms (M-3075-E)
2011+ Ford OEM Swaybar Endlinks
BMR K-Member with Stock Motor Height and Stock Steering Rack
BMR LCA + Relocation Brackets
BMR UCA and Mount
BMR Panhard Support Brace
BMR Adjustable Panhard Bar
FRPP Sway Bar Kit (M-5390-A)
FRPP Bump Stop Jounce Kit (M-5570-A)
FRPP 14” Brembo Brake Kit
7/8” Spacers at all corners with Extended Studs
-If I have time I will remove rear axle, remove surface rust and paint it black. Going to swap fluid in the rear too and change out the diff cover.
Appearance: Still working on it.
-Removing washer nozzles on the hood and filling in the holes. Removing washer fluid system all together
-Removing Sirius Sat Wart on the trunk and filling in the holes. Relocating it inside the rear window.
-Removing front antenna on fender and filling in the holes, doing a stealth antenna inside the top of the front windshield
-Removing the window tint. Doubt I’ll reinstall it.
-Stock appearance for the most part with the exception of a couple things. I’d like to keep the overall “muscle car” character of the car intact.
-Reconditioning all exterior plastics and replacing some trims that are either damaged or weathered beyond repair
-Ton of TLC with the paint, new front bumper too.
Interior: Plain/stock
-Reconditioning all the interior trim pieces
-Reconditioning leather interior
-Probably a single aeroforce interceptor gauge
Enough of that though… time for destruction!
Started with the interior. Removed Navigation head unit and will be putting a Shaker 500 back in. I don’t need anything advanced since the car isn’t a DD.
Removed push button start gimmick.
Removed hands free aftermarket system, bunch of wires I don’t need back there.
Guy who installed this system did a hack job putting it in, crap all over the place and not tied down. I need to repair the harness too.
After all removed.
Backseats out and all of carpet trim
Removing sat wart
Removing front antenna
Picture of ole’ faithful
Last edited: