I used the VHT header paint for my...headers. I've never really had great experiences with painting headers. So, I modified an old electric oven to bake them. I built a sheet metal box the size of the oven door when it's fully open. So the door became the floor of the oven extension. I made the whole thing double walled and stuffed it with insulation. Made a lift off lid. Then I baked the headers for the directed time. That was 4 years ago. The paint has held up surprisingly well. I'm just now starting to see some rust specs coming thru, but that was only after driving it once on a salted road last winter in CT. So, if you have access to an oven, it will definitely help. Not sure what it would do to the seals on the calipers, but I think they would get hotter on the car than most ovens would get.Decided that I hate VHT caliper paint and that I'll never use it again
This boy is our fourth in about 35 years. Once you share your home with a German Shepherd your hooked.Beautiful dog! I love German Shepherds.
There is nothing wrong with the clutch so I will reuse it. The setup is; McLeod lightened steel flywheel and street extreme single disc clutch and pressure plate. Using a new McLeod throw out unit I have 3 9/16” form the transmission mounting face to the throw out face. I have 3 1/8” from the pressure plate fingers to the tranny mounting face on the bellhouse. 7/16” is not enough travel so I added a 1/2” spacer for 15/16” of preload. My clutch pedal should not be on the floorboard.