eighty6gt
forum member
- Joined
- May 9, 2011
- Posts
- 4,299
- Reaction score
- 405
Hi, Steve,
I can't find a crank damper bolt in the catalog, I need one for the 4.6 in my 2008 Mustang Bullitt.
16x 3L3Z6571DA (I bought a package of mahle from rock auto and only got 8)
A frost plug - for where a block heater would go, should all be the same on the side of the block. Maybe get a couple in case I screw one up driving it in, depending on what they cost.
F75Z6730BA - spare drain plug, I was just going to get the gasket but the plug is cheap.
8* nuts for my new sway bar end links
M1012-A - 2 packs, 10 nuts total
I know I asked about the grey ones, but are still these around: http://www.tascaparts.com/mustang/wheel-18-black-mustang/m-1007-s1885b/?parent=1104 ?
If you like you can save the unknown stuff in a cart and I can just add the rest. I might wait a while to put the order in, shipping is expensive and I might remember a few more things or break stuff.
I can't find a crank damper bolt in the catalog, I need one for the 4.6 in my 2008 Mustang Bullitt.
16x 3L3Z6571DA (I bought a package of mahle from rock auto and only got 8)
A frost plug - for where a block heater would go, should all be the same on the side of the block. Maybe get a couple in case I screw one up driving it in, depending on what they cost.
F75Z6730BA - spare drain plug, I was just going to get the gasket but the plug is cheap.
8* nuts for my new sway bar end links
M1012-A - 2 packs, 10 nuts total
I know I asked about the grey ones, but are still these around: http://www.tascaparts.com/mustang/wheel-18-black-mustang/m-1007-s1885b/?parent=1104 ?
If you like you can save the unknown stuff in a cart and I can just add the rest. I might wait a while to put the order in, shipping is expensive and I might remember a few more things or break stuff.
Last edited: