For Those who have done a Auto- Manual Swap and got your Cruise Control Back

ReMustang05 · Jan 6, 2011

How did you do this? I've been driving around without cruise control for over a year now and I finally decided to buy the clutch/speed deactivation harness/switches. Everything is fine but the big black box that has to do with the speed deactivation. It has a female plug in, where's the male? I noticed that due to the length of the wires it looks like it goes somewhere between the brake and gas pedal and even has a clip spot like it hooks onto something. I never saw a spot. Any help would be appreciated.

*EDIT* POSTED A PICTURE, the small grey square goes into a connector by under the dash close to the drivers A-Pillar and the two small connectors go to the 2 clutch pedal sensors, no idea what the big black box goes to

Anthony05GT · Jan 6, 2011

I never really cared about cruise control and I've been driving this car for over 5 years after the swap and back when I did it, I noticed the standard transmission cars had a relay mounted just above or near the go pedal which was called ''pcm power relay'' or something like that. My car which was originally an auto DOES NOT have this large relay, so??? Now you've got me curious even though I don't use cruise control.

I do know that my car had the wiring under the dash for the cruise control deactivation switch and the starter enabler switch, but I never purchased that set up in your pic. I connected the starter enabler wiring and that's it...no switches were installed by me. I suggest you get someone with a manny car to look under their dash and get you a couple of pics to look at.

ReMustang05 · Jan 7, 2011

Turns out that is exactly what was said, a spot for a relay for the "PCM power relay"

raisinjack · Feb 10, 2011

mine has the relay and the diode already in it and I just need to know where the relay box mounts it is called "auxiliary relay box 1" know a guy at a ford dealer and may go there to find out about it unless someone here can tell me where the relay box goes!

Anthony05GT · Feb 10, 2011

It goes near or above the accelerator pedal. Either way, you should get a look at a manny car to see exactly how it mounts.

ReMustang05 · Feb 11, 2011

I actually got it taken care of, due to previous work on my car (long story) I had a diode/resistor installed. I apparently always had cruise control since then but the sensor peg on the towards the top of the brake pedal arm wasn't getting pushed in ever so the cruise control read that the brakes were always pushed there for never allowing cruise to engage. Now I have this brand new harness and no one wants it/ Oh well.

Anthony05GT · Feb 11, 2011

Ok, what do I need for cruise...not that I want it?

ReMustang05 · Feb 11, 2011

Anthony05GT said:
Ok, what do I need for cruise...not that I want it?

It should just be this harness with a diode and relay (purchase seperately)

Anthony05GT · Feb 12, 2011

Where do the diode and relay go on the vehicle?

raisinjack · Feb 12, 2011

i found out where that stupid relay box mounts! it goes on a metal bracket that installs on the 2 left side studs on the gas pedal mount. I am trying to find that bracket now as my auto does not have it. If you like i can email you the picture I took yesterday on a 2006 manual gt.

Anthony05GT · Feb 13, 2011

PM sent

Anthony05GT · Feb 13, 2011

So, how much for everything?

ReMustang05 · Feb 15, 2011

$50 plus ship for harness, retails for $98

Anthony05GT · Feb 15, 2011

What about the other shit? I know you don't have it, but what's the cost?

ReMustang05 · Feb 16, 2011

What other stuff? The only thing missin is the bracket, diode, and relay. Diode/relay shouldn't be much at all

Anthony05GT · Feb 16, 2011

That's what I'm talking about, the other shit. Didn't you buy it? Are they dealer items?

ReMustang05 · Feb 16, 2011

I didn't buy it, I thought everything I was going to need was with the harness, you can get a diode anywhere and I'm sure the relay to as long as it's the same size. The bracket would be a dealer part.

raisinjack · Feb 16, 2011

when I bought the harness it came with the relay and diode already installed. and I have an extra bracket that mounts on the gas pedal that holds the relay box. and good luck on getting a dealer to find that bracket!!!!!!!!!!!!!!!!!!!!

Anthony05GT · Feb 16, 2011

I'd like to have the part number for the relay and diode.

VectorPat · Jun 17, 2012

Sorry for digging this up, but does anyone know what the part number would be for this and maybe have a pic of how its installed?

For Those who have done a Auto- Manual Swap and got your Cruise Control Back

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Similar threads

Support us!