Recent content by robz

Baked Sea Bass With Black-Olive Sauce 4 cloves garlic minced 1 c pitted black olives chopped 1 ts crumbled dried oregano 1 ts crumbled dried basil 2 tb minced parsley 1 salt 1 freshly ground pepper 1/4 c olive oil 2 lb sea bass fillets (4 to 6 ea) 1/2 c vegetable stock or dry white...

I'm sure you can go to TAP plastics or somewhere similar and get some thick plastic sheet and cut it to size. You will need to have the protection and load displacement that the outer skins afford the bladder. Also, go with a better quality seat bracket, like the ones Planted makes. My cage...

To smooth out the airflow.

Next up we have the passenger seat. This is the one I was worried about more because of the OCS occupancy sensor pad between the seat cushion and frame. Here is the bottom of the passenger seat, showing the harness and associated sensors. The OCS is the one in the center going through...

Although I do not take my 2006 GT to the track (I have a dedicated fox for that) I do enjoy taking spirited drives on my local winding back roads each chance I get. With a sticky tire/suspension combo I quickly realized how inadequate the stock seats are in these cars. As my car is my daily...

Just got done installing a set of Corbeau A4 wides in my 2006 GT, and swapped over all of the necessary wiring/sensors to retain full functionality. Very supportive seats which retain factory functionality, which I needed as this is my daily driver. My only gripe is that the light grey...

Spend a few more pennies and get a 2011+ \thread https://www.youtube.com/watch?v=uOwSPccbzl4

Eibach Pro Kit and Koni Yellows, wheels are SVE Drift 19x9.5 with 275/35-19 Nitto 555's

Nope.

Where are you at? I have two stock mufflers in my garage gathering dust that were removed the day I brought the car home from the dealer new. I am in Norcal.

When jacking up the front of my '06 for an oil change I block the rears and jack from the center k member and place stands under the front subframes. When time came to install my pro kit I knew that there would be no way to get the jack under the subframe from the side afterward. I also did...

I'm running NT-01's on my 88' GT track car, 315/35-17 square. All I can say is that the grip like hell and wear nicely. I can't claim that it's the ultimate track tire, but I have nothing negative to say about the tires so far.

Reading comprehension, how does it work? I pulled the coils and found that the #1 spark plug had backed out a couple threads. Inspected and reinstalled, problem solved.

I did a search and came up empty for my particular symptoms. A little background info on the car to start with; 2006 GT with 93,XXX miles on it, I am the original owner. Religious oil changes with Mobil1 every 5K miles. Fuel used is always Chevron 91 octane. This is my daily driver, about...

Could that inner sleeve not be pressed off of the arm? (assuming you have access to a press). I have the prothane front/rear bushings which are essentially the same design, I'm trying to game plan the install as well.