Search results for query: *

  1. Blackbird1084

    Cobra jet intake and procharger

    Has anybody done this? I've been looking into getting a procharger, but I don't know what piping/coupler changes I would need to make for it to fit with the cobra jet intake that I already have. Any ideas?
  2. Blackbird1084

    8 rib Vortech/Paxton pulley

    Ok I'm needing an 8 rib Paxton/Vortech pulley. Anything in between 3.6 and 3.15. Sent from my iPhone using Tapatalk
  3. Blackbird1084

    05-10 struts on 13'?

    Is the only difference the dampening rate? I recently bought a car(wrecked) that has koni yellows and eibach pro line springs. My 06' is already lowered. I was wondering if they'll be ok to run them on my wife's 13'? Sent from my iPhone using Tapatalk
  4. Blackbird1084

    Shoutout to CHE

    I was working on my 06' recently and noticed my CHE radiator support had a crack in it. I figured it was just something that happened after awhile. So I contacted Che via email and asked them if it was a problem. They said no that it's not and to send them a picture. So I sent the one posted...
  5. Blackbird1084

    HELP ASAP

    Need to know where this wire goes. A friend took it off while installing twins and now doesn't remember where it goes. Sent from my iPhone using Tapatalk
  6. Blackbird1084

    PB in wife's car but not right

    So I went to the track Sunday and made a few passes. Here's a mod list. Cobra jet intake unported Cj twin 65mm throttle body Ford Cj cai Sct (with what I think is just a base tune for the intake) O/R x-pipe Bmr lca's/relocation brackets White line trans bushing Barton two post bracket On all...
  7. Blackbird1084

    Sct pro-racer

    Their site says it work for up to 11'. Has anybody here used it on a 13'? I'm wanting to pick it up to tune on my wife's car. Sent from my iPhone using Tapatalk
  8. Blackbird1084

    Gains?

    Ok so I recently took my wife's 13' to the track and ran [email protected] with a 2.08 60ft on street tires. I went and bought a Cj intake, Cj twin 65mm tb, frpp Cj cai, sct tuner (with canned Cj intake tune), pypes o/r x-pipe, bmr lca's, and bmr lca relo brackets. I'm curious as to what I should...
  9. Blackbird1084

    Wife's new car

    So I took my ol'lady's new car (13' premium GT) to Mokan dragway. The very first pass was a 13.20@107 with a 2.08 60ft. I made a couple of more passes running 13.26,13.12, and a 14.25 (blew the tires off through 1st/2nd). I decided to let it cool off for a few minutes (about 20) and then went...
  10. Blackbird1084

    5.0 headers 2" primary

    Has anybody ever used a set or seen a decent increase over 1 7/8" or 1 3/4" primaries with a 2" primary? I know nitrous cars tend to see an increase from larger primaries and that's kind why I'm asking. Sent from my iPhone using Tapatalk
  11. Blackbird1084

    The wife's new ride

    Unmolested premium M6 with 26000 miles. Sent from my iPhone using Tapatalk
  12. Blackbird1084

    Phaser spring/lockouts

    Ok so I was installing my livernois -10* lockouts and I decided to watch a video to insure I was doing it correctly. I had up until the point where it said to put the second long bolt on the phaser under the spring. I looked for a minute only to find that neither of my stock phasers have this...
  13. Blackbird1084

    Wtb degreeing tools/valve spring compressor

    I'm looking for degreeing tools (preferably a whole set aka degree wheel, dial indicators, piston stop, and anything else) as well as a valve spring compressor and the adapter needed to do a compression test/pressurize the cylinder to change springs. I'm willing to buy and or borrow. I have...
  14. Blackbird1084

    Wastegate?

    Ok my problem is that I need a wastegate but I can't find one for a decent price that has an aluminum welding flange. My car has a Vortech v3 intercooled and I'm wanting to put a wastegate on it and pulley it down so I can get better torque. Does anybody know of one that comes with an aluminum...
  15. Blackbird1084

    Running rough poor et

    Ok my car has been running rough for awhile now. I've always thought it was a tuning issue (had mutha thumprs and now have a v3, no more cams). It bucks and jerks between 1500 and 2700 rpm with a noticeable miss at idle. No miss fire codes come up. I was wondering if my stock 155k mile cop's...
  16. Blackbird1084

    Converting to blow-thru

    So I've decided to convert my setup to blow-thru. I know I need to relocate the maf to after the intercooler. I know I'll need a "power pipe" and bov. My questions are, should I add a wastegate (to control boost) and toss on a od balancer? I'm trying to increase my torque down low. Has anybody...
  17. Blackbird1084

    Thoughts timing and boost?

    So I boost leak checked my car after dealing with a leaky intake issue. I found a small leak by my tb at the coupler. Fixed it by repositioning the clamp. It held 20psi before my leak tester slid off the blower. No leaks anywhere else. Now I'm a little miffed at the fact that I'm only seeing...
  18. Blackbird1084

    Master or slave cylinder

    Ok so last night I was running a buddy of mine when I went to shift to fourth and got nothing. The clutch has only the pressure of the spring holding it out. I could shift the car via rpm match shifting and while in gear, at wot, the clutch held fine with no signs of slipping. I got under the...
  19. Blackbird1084

    Ford intake help!

    I boost leaked tested my car and it's leaking all the way around the intake! Can I pull the intake apart and reseal it? Need help ASAP! Sent from my iPhone using Tapatalk
  20. Blackbird1084

    Fuel pump doesn't shut off?

    Ok after I finished my Vortech install, I have been having some issues with my car being hard to start acting like it's flooded. So I logged it and it shows fuel pump duty cycle at 75% (150% actual) even at idle. It throws a fuel rail sensor range/performance po191 and this morning a p1237 fuel...
  21. Blackbird1084

    Weird characters on odometer

    Ok so my battery completely died then I charged it back up. But since this, my odometer shows a bunch of odd characters, letters, and numbers. I tried searching but I guess my terminology isn't right because it came up empty. Sent from my iPhone using Tapatalk
  22. Blackbird1084

    Diablo tuning for Vortech?

    I need help finding somebody that can do an email tune for a diablo tuner on a Vortech car. JPC told me they don't have time and almost everybody else only uses SCT. Sent from my iPhone using Tapatalk
  23. Blackbird1084

    Boost?

    Ok so I just finished up my Vortech install and I'm at a crossroads. It's a v3 kit to which I added a Cx racing intercooler. My crank pulley is 6.8" (roughly .25" larger than a stocker) and I have a 3.33 blower pulley on right now. My question is, is this combination going to produce too much...
  24. Blackbird1084

    Vortech v3?

    Ok, so I've just about got everything I need for my car and am getting ready to get my kit installed and dyno tuned next Friday. Here's a run down of my mods. Gt500 tb/spacer Frpp intake 60lb injectors Hooker LT's O/r x-pipe Cx racing v3 intercooler kit Single 400 lph fp 3.90 gears Diablo...
  25. Blackbird1084

    Wheel pics?

    Does anybody have these wheels on a 05-09 body? If you do please post up pics. I'm looking into buying a set. Sent from my iPhone using Tapatalk

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top