Search results for query: *

  1. blacksunshine01

    19x9.5 SVE Drift. Tire and spring selection

    Grim what tires did you go with?
  2. blacksunshine01

    19x9.5 SVE Drift. Tire and spring selection

    I run 285/35 s04 pp on my 9.5 drifts. Im on h&r race with no front isos and koni yellows.i have about a 1 finger gap from top of tire to the fender. I have 0 rub and am kicking my self for not going with a 10 in wheel as there is a decent bit of clearance on the inboard side.
  3. blacksunshine01

    Dropped s197 still running 2pc drive shaft

    Wow. Im on h&r race with no isos and blew out the lr bump stop with in a week of drivi g. The remaining rr stock bump stop is sniffing the frame at a stop
  4. blacksunshine01

    305/30/20 Pilot Supersport rub - alternatives?

    If you do end up going 295 all the way around why not just run a square size if the wheels are allready the same?
  5. blacksunshine01

    Rockford Fosgate 8" in doors

    Nbk that looks real nice
  6. blacksunshine01

    Building my own forged wheels.

    Koenseigg is 3d printing their turbos for the 1:one Op the first pic looks like a 7 spoke 03 cobra wheel. I dig em
  7. blacksunshine01

    Door Panel Leather Sagging - **FIX**

    Dude thats what i used on mine and it lasted like a month here in sa. I forget who said it on here but i think there needs to be a intermeadiate material there in order to get everything to bond back together rock solid. Like a old t shirt cut to match the main part of the pannel. And btw put...
  8. blacksunshine01

    S197 Aftermarket seat install

    So is your drivers seat still power?
  9. blacksunshine01

    Door Panel Leather Sagging - **FIX**

    Sid where did you get the plastic for your inserts?
  10. blacksunshine01

    Door Panel Leather Sagging - **FIX**

    Pass side edge is starting to fall again already. That was my first side and the one that sees less action so im not too sure why its giving way. Guess ts time to start pricing some interior shops.
  11. blacksunshine01

    Door Panel Leather Sagging - **FIX**

    Well i just got done doing my inserts like the op did and i have to say i hope they hold. The contact cement is no joke with the fumes. I did mine in an open garage with the windows down and a fan going and it was still really bad. I defenately sugest using a mask ot just flat out in the drive...
  12. blacksunshine01

    Need assistance with wheel offsets...

    Anybody know if the zevens are hub centric or lug centric?
  13. blacksunshine01

    Thoughts on Maximum Motorsports 2011+ Road & Track Box

    I had problems with the mm plates on my car. Went to install 2 times and had bolts striping when torquing to their specs. That bieng said mm and am both have absoluty outstanding customer service and took care of me. I ended up going with the vorshlag plates koni yellows and h&r race springs. I...
  14. blacksunshine01

    Tire Size/ Wheel Offset Advice

    285/35r19 bridgestone s04 on sve drifts and around 2" drop on h&r race springs with no isos. No rubbing yet to be had.
  15. blacksunshine01

    My FX-R Retrofit

    The oem 13 fogs are led?
  16. blacksunshine01

    My FX-R Retrofit

    Op. Great job on the retro! I have been super tempted to do this with some mini h1s. And what am i missing with the 13 fogs? What is the deal there?
  17. blacksunshine01

    Tire recommendations?

    285/35r19 potenza s04pp here on all 4 with 9.5 wheels. I am all stock other than suspension and have yet to break them loose. Snd they have been doing great in the wet also.
  18. blacksunshine01

    rollin on new rims

    I guess it's all in the offset. I have 285/35/19 square on my 05. I'm lowered on h&r race with no front isos and I only have about a fingers width from the top of my tire to bottom of fender and I don't rub at all. I would guess my set up is probably 2- 2 1/4 overall drop
  19. blacksunshine01

    Tire pressure for 275/40/18 tires?

    You shouldn't have to worry about the bead coming off if you have the correct wheel/tire set up. (I.e. not having a 215 section tire on a 10.5 wheel or like a 315 on a 9 in
  20. blacksunshine01

    Lm style wheels

    So 281 I take it by your sig you didn't go with the xxr's, any particular reason why the amr's vs the xxr?
  21. blacksunshine01

    Shark Tales stance build version 2.0

    Love the new look! I am also super interested in the possible front brake swap set up your talking about. Keep us posted
  22. blacksunshine01

    Do NOT paint the letters yellow

    Damn that's really surprising. When the breeze blows the wrong way when I spray that stuff it makes my lungs feel like they're melting. I would figure a little paint would be no problem.
  23. blacksunshine01

    Do NOT paint the letters yellow

    Maybe try some wesleys bleach white tire cleaner. That will clean all sorts of crap off of tires. Just for the love of God don't let it get on your wheels

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top