Search results for query: *

  • Users: nmeofdst82
  • Content: Threads
  • Order by date
  1. N

    Italy sucks...oh yeah, I need help please

    Italy sucks...oh yeah, I need help please (FIXED) so I shipped my car but it ended up taking like 1/3 of the time so it ended up sitting at the port for 3 months.... I picked it up last week and did a walk around/under and didn't see anything obvious. After test driving it around town, I...
  2. N

    What the hell is this Sound coming from????

    I've heard this kind of sound when high HP cars shift in videos for a long time...for the life of me...I've never heard it in person. The "wherrrrdedede" sound at each shift in this video is what I'm talking about. I've heard it on videos ranging from mustangs to BMWs that are high HP...what...
  3. N

    2010 Mustang Revealed....83 days from today...Website Info Link

    http://www.fordvehicles.com/the2010mustang/ For those who just absolutely have to be the first ones to see it, here is the link to sign up "for updates" Countdown ticker says about 83 days from today, 27 Aug.
  4. N

    Gatorback Vs. Gates....Belt Slip Issues

    Ok...So I just changed from 3.6 to 3.4 Pulley.... I had the Saleen standard issue Gatorback for the 3.875 pulley on with the 3.6 pulley when I changed it, and the 3.4 until I changed it for a Gates K061080 a few days ago. Even though the Gatorback for the 3.875 (475 kit) was too big for the...
  5. N

    Where did you T in your Mechanical Boost gauge with Saleen Supercharger specifically?

    This is from another site were someone did it, but looks like it couldn't possibly work. With the updated vacuum routing from where that T goes into the SC around the back to the bypass, it looks as if he doesn't have it hooked up to the bypass at all..... If you have a Saleen Supercharger...
  6. N

    The more I look...The more I need advice

    Ok..so this past weekend was my first trip to the track. I had really good luck with my RT at .106 to .238 over 9 runs My 60' were between 2.001 and 2.17 (except for my first ever run at 2.79 ouch) With 416rwhp, 3.55, stock suspension (billet LCAs is only modification to suspension), KDW...
  7. N

    Line Lock wiring...Need some help

    After 3.5 weeks, finally have all my damn line lock crap from RPM... Instructions for the wiring is..."Wire as needed for your specific application" That really makes it crystal clear... Couple questions.... 1. Is this right: One side of solenoid to ground inside the car by the kick...
  8. N

    My car made it onto HotRodReview.com...

    Heya, My car made it onto Hot Rod Review http://hotrodreview.com/gallery/mustangs?page=1 Vote for it if you feel like it. My wife is still shaking her head asking me how it got on there..haha.
  9. N

    Accel Coil Go Boom...Wife goes BOOM..

    OK..so I had got these stupid Accel Supercoil deals because they were on sale, I had just started modding, and I had just found this board when I bought them already...... Driving on a much needed family outing today after waxing my car. Drive along the beach, stop and take pictures, etc...
  10. N

    Take a look at this Pic...How bad did I screw UP???

    Ok..so I think my torque wrench is jacked up. I set it for 20ft lbs and the first bolt I tightened busted off the stud. This picture is not my car..but shows what I installed and what stud broke..take a look and tell me if I should be fine please. Still feels really solid when you yank on...
  11. N

    Splice in X Pipe...Best way to cut Factory H??

    I'm a little light on the fundage for the next 8-12 months it seems...so I am getting a Pypes splice in X pipe. 92 bucks was just too cheap until I can buy LT/Off Mid. My question is...what is the easiest way to cut that factory H pipe for the splice in....without removing the H pipe. I have...
  12. N

    Under hood pieces...Home Polishing..Need Help

    Ok..Here's my deal..I need help. I'm trying to do what I can to make the engine bay a little nicer for the show season. I have a few ideas but not sure how to go about accomplishing them.... Polish PCM Housing - Its a big metal piece clearly visible...can it be polished and how (at home)...
  13. N

    Dyno'd Finally after 3.6 Pulley swap.....

    With the 3.875 pulley and Saleen canned tune, I had 389/376. New Sheet attached: 416/404 with the 3.6 The saleen canned tune was running a much leaner A/F..right around 11.9-12.1 with no issues. This tune from Brenspeed is at 10.8-11.1 The graph shows a little different, but that was...
  14. N

    Need Help with Popping sound on Acceleration

    So, I had 200+ miles this weekend with no issues on my new tune. Ran fine in and out of boost going to the Car show and back this weekend. Car sat Sunday, Started this morning and warmed up for about 5 min, went out of my housing area and had an issue. I coasted in neutral down the hill...
  15. N

    Under Hood Paint that Will Stick to Plastic...and Opinions

    OK, Kind of a hybrid tech/pimpin thread...need some expert help and opinions. I'm not a big fan of billet under the hood or its price...but I want to dress it up a bit here and there. I am looking at painting the radiator front and rear covers, the fuse box cover, intercooler overflow...
  16. N

    Video Link - GT500 w/ 3.4 Whipple 9.34 @ 147..Last run on video

    Shelby-GT-500-with-34-whipple-supercharger---few_144561 Shelby GT 500 with 3.4 whipple supercharger - few 9.34 Damn!
  17. N

    So..There I was Installing My Stuff from Brenspeed and BAM...NEED HELP

    So..There I was Installing My Stuff from Brenspeed and BAM...RESOLVED I want to preface what I'm about to say with the fact that I really like brenspeed and have great dealings with them.... Having said that, I think they temporarily hosed me, unless I'm just retarded and missing something...
  18. N

    Don't Laugh, First Trip Ever to a Dragstrip...(also found a way to piss the Wife off)

    Went to Infineon today and it was a blast. Didn't race because I'm in need of a helmet, DS Loop and some practice launching I think. 2 Things, 1. Is Infineon a slow raceway or something...cause the Mustangs that ran there today were a heck of a lot slower than I would have expected by...
  19. N

    New Gauge Mounting Hardware....Anyone used it yet..Opinions??

    http://store.roushperformance.com/detail.aspx?ID=1076 Anyone seen these in person? Installed them? Opinions? Thinking this would be absolutely awesome for my situation...i.e., My wife says get an A-pillar and get a cot while I'm at it...and I already have the Saleen center dash gauges...
  20. N

    Rear Deck Removal for Speaker Replacement - 2007/2008 Specific

    Posted this on a different board, thought it might be helpful, unless I'm the only one who didn't know this yet, LOL......... OK...Just did the rear speaker replacements in my 08....WHAT a PITA! Lessons Learned: After folding down seats, the plastic push pin at the bottom and top come out...
  21. N

    Mustang and Ricer Drifting in Circles around Gas Pumps...Video

    QLUSR2roAFs This is the video I told a few people about. There's Dumb, and then there's Dumbass Dumb.
  22. N

    2 videos of Carputer...Going to attempt to transplant into 2008

    Ok, So the 2 videos are kinda long but they show off my carputer pretty nice and what it can do...which is a crap ton of stuff. I have the factory nav/sirius in the 2008, but I still wish I had the carputer in there. Where I had it in the 2004 GT was mounted at the top of the windshield...
  23. N

    Need help quick, gotta order to get stuff her by Friday for Custom Tune Saturday

    Heya, I'm getting a custom dyno tune on Saturday the 8th. Want to go from 3.8 to 3.6 pulley and add the Oversize Waterpump pulley from Brenspeed. 1. How hard/how do you change the saleen pulley? 2. With the 3.8 to 3.6 but going to the oversize waterpump pulley, will I need a new...
  24. N

    It's hard to find good help.....Saleen installed blower...not so great install

    Well, 3 1/2 weeks after getting the Saleen S/C installed by Saleen, I barely managed to avoid a catastrophe today. Seems that when they installed the new power line harness to the Alternator, the bolt was not tightened right/enough. It had managed to come loose, start arcing enough to...
  25. N

    UPR Throttle Body Spacer with Saleen S/C???

    I searched and searched, but couldn't really find a solid answer on this. http://www.uprproducts.com/shopping/shopexd.asp?id=1406 is the link for it. With the Saleen blower at about 6.5-7psi, will this help/hurt/indifferent?? Still going for every bolt on I can get for a little extra...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top