Search results for query: *

Just curious if anyone is going this go round?

For all those that did the swap, what have you done to stop the noise/jarring sound that has come from the starter other than opening he bolt holes? It almost sounds like an old Chevy motor with a worn belt when I let off the starter as if something is jarring when the starter sucks back in...

I figure since I got everything put together last week I would show you a picture Of my "road race" setup for the mile. I have 09-10 gt500 wheels with nittos for the street. I ay switch everything over to these wheels from now on. Sent from my SAMSUNG-SGH-I717 using Tapatalk

I know this is horrible to say but i still have my Shaker 500 head unit in the car. Now that being said and the stones being thrown, its fubar'd and stuck in a perpetual act of shuffling cd's. My question to everyone is, has anyone had their unit go out and it drain the battery? My car sits a...

So I'm curious to see if anyone is going this march? Ill be out there and excitedly all my kids will be making it again this time. This makes everything perfect as it was last march when i hit 190.2 with the trans coming out of gear at the 3/4 marker. I even went back to my Car number from last...

These came out of my car last September and have been in a zip lock bag in my truck door since then. No problems with them I just upgraded to ID1000s to handle the push to E85. I'm in Houston and welcome local pickup. They have two Texas Mile trips and some dyno time as well as about 200 miles...

I just wanted to see if anybody was planning on going to the mile this year. Ill be there although I'm suffering a huge loss to my pit crew with my twin daughters not being able to go this time. I'm so thankful I got custody of them just sucks the way the weekends roll out and there mom gets...

Im getting rid of my in trunk cell with magna fuel pump and installing a triple hat back in the factory tank. I was hoping someone had some pictures of how you routed the fuel lines to give me a better idea of where I'm going along with what works right. Thanks a bunch Sent from my...

So here it is, the week of Texas mile and i need to have the tune checked on the car. Last tune for the mile was done on C16 at 21psi and got me 901rwhp and 868rwtq. This was using the Ford Racing intake manifold that i kept popping the gaskets on. Now i have the JPC Manifold. So here are the...

moving the ECU and wiring all outta the engine bay........... Passenger side fenderwell, behind tire A little Paint touch up, just a little!!! no clear ^^^^^^ next few are the first bit of clear on it..........

Needing a cowl hood preferably, my stocker is trash! Please let me know what you have, sorry i posted wrong the first time.

Need me a hood to replace my old battered stock hood. Hopefully someone has something. thanks [email protected]

Well the time has come after im tired of drag racing the car for the most part, to change to a different venue. I scraped the anti-roll bar and replace and re installed swaybars front and rear, upgraded panhard and brace( for now till i feel like getting a watts link). Lowered the car via steeda...

These are my videos from the track. I lost my "film crew" for the 4th run and only have in car video. Im on bogarts with et drags on the rears. http://www.youtube.com/watch?v=OsMwtyp-UhY OsMwtyp-UhY second is all in car video oA4NgUTTsBw [email protected]

So its been quite some time since i have actively posted here. Keeping my company strong and being a single dad took my focus away from the car for a bit, but the past few weeks i started under the radar and came up with this! http://www.youtube.com/watch?v=Icm3C7QIjxE The Car had fuel issues...

I have been out of the game for a bit. Lost a close relative last year in October and i lost interest in the car for a while. So after letting it sit a good few months i regained interest and went in to change a few things. Of course once it was back on the dyno to tune...... bwahahaha a turbo...

I have the whole setup that i want to get rid of, transmission that was just completely redone, crosmember, shifter, cable, flywheel, sfi bellhousing, scattersheild, new 3000k stall Circle D convertor and driveshaft. Im ready to go back to a manual transmission. This is the original post from...

For sale is the twin turbo kit off of my 06 mustang, the kit is built by Fastlane. Kit can be seen here ---> http://www.fastlaneturbo.com/fordmustang.aspx although my kit has larger turbos than their normal kit. I will be selling the entire kit for a great price of $4500 and would like to move...

I havent posted this anywhere else but my local site so here is my final for now video with the cams installed. Ill be going to the track this weekend to start relearning how do drive it. IM NOT MENTIONING NUMBERS SO DONT ASK LOLOLOL. cams are a custom grind from comp, very similar the the XFI...

Beehive 3 Valve 4.6L, Valve Springs PART #26113-24 These were in the car for about 10 dyno passes, when i decided to switch to a big set of cams, they were not heavy enuff to stop valve float. Nothing at all wrong with them i just want them gone with the wind since i already installed the...

I was going to use this kit to do a direct port shot on my car, but i want to wait a little bit. There is nothing wrong with this kit at all. Kit includes 1 Fuel and 2 Nitrous solenoids the 250hp ones, 10lb bottle, bottle heater, pressure switch for heater, and a billet bottle bracket. $600 +...

I don't normally post videos up or pictures for that matter, but I'm so happy with the fitment and how it looks i wanted to show you all. I also haven't seen anyone with the 6 gauge option either so i don't mind being a guinea pig.!! The song at the end kicks ass, Judas Priest - "Turbo Lover"

This setup comes with everything needed to bolt up to a 2005+ mustang. If you have any other mustang then the crossmember and driveshaft will not work. Built Turbo 400 3 speed automatic transmission, built by Automatic Transmission Factory. Rated to handle 1000+rwhp. BARELY used! ATF has...

Just a few pictures and a couple of vids to satisfy anyone!! ill also leave the link to my photobucket where there whole process and transformation is. album - http://s66.photobucket.com/albums/h245/litebulbcw/ 1/8th mile track testing. http://www.youtube.com/watch?v=fO0wxMGF0ac 1st...