Search results for query: *

  1. S

    Built 6r80

    On the process of going Phase 2 on my customers F150 Twin turbo. Currently making 570Rwhp on 8 psi on a Jet Using Twin 6266 Turbos with JMS Fuel booster and CJ intake & ID1000. Phase 2 is going built shortblock, upgraded trans and a water/meth injection. My question mainly is about...
  2. S

    Project : GTF500 (GT500 Swap on F150)

    Started this project few months ago and is almost complete, thought Id share it with you guys. It may not be a mustang TRUE but it has a heart of a GT500. What I started with. 1) GT500 ENGINE 2) tr6060 trans 3) Long hurst shifter 4) Driveshaft thats ready to be cut as measurements...
  3. S

    T56 Magnum XL install on 5.0L

    I'm about to install a t56 xl Magnum on a 5.0L and was wondering who did the install as well and how did you guys wire up the Reverse solenoid and the other sensors... Any input is apreciated. Thanks.
  4. S

    2005 built 4.6 with whipple..need more

    Its a 2005 Mustsang GT with build shortblock, Livernois stg 3 heads with spr stage 3 blower cams..whipple 2.3L +21 psi of boost on vp109 fuel Car is pusshing somewhere areound +620 rwhp...and in need of more.. Any suggestions ? Any one knows better cams ? gauranteed ? Keeping the...
  5. S

    Overhauling The MT82

    I received the transmission open in peices along with new Synchros and other few gears such as the 5th. I'd like to assemble it back and do the job once so can any one share any type of instructions or a service manual the is Specificaly for overhauling that MT82 trans ? Thanks.-
  6. S

    2013 GT500 just decided not to start

    I have a friend of mine who has a 2013 GT500 with full boltons + steeda triple pass heat exchanger with dual fans. His car is on base tune but he had the codes P0300 P0303 P0305 Which basically was for the crank relearn process, he drove the car for 1 month with not alot of wots...
  7. S

    p0012 Poppin out on a cammed Stang

    I have a 2011 Mustang GT with comp cams and limiters and other boltons thats popping a P0012 Intake [A] camshaft position timing overretarded [bank 1] Complete mod list is Longtubes JLT CAI Fordracing TB Compcams stg 3 Compcams limiters Just so you know, the car drives just fine...
  8. S

    Comp cam with Phaser limiter install ISSUE

    Could you please help me out with this issue were having ? We recently installed Comp cams Stage 3 on the new engine 5.0L mustang (2012 GT ) and just for a base tune to start her up the idle doesnt seem right, and a P0019 code popped up. Sent a reading to one of my tuner friends and he...
  9. S

    No ignition after WOT

    I wsa driving my cousins car around testing it after being tuned n all, and in 2nd gear once I hit the rev limit the engine just died. Took it back to the shop and I checked almost everything on it, everything seemed to be perfect like compression, plugs, injectors , fuel system. I...
  10. S

    GT500's with aftermarket TB

    I've been having a problem with almost 80% of the GT500's I tune with aftermarket Throttle body. The issue mainly is that when the vehicle (After being tuned partial throttle/WOT) Hits the rev limiter it quickly goes into Fail safe mode. No matter what I do or what I try it does that. I know...
  11. S

    Issue with Whippled Mustang

    I am having an issue on a whippled mustang which is that after I dial in the tune and drive of for partial tuning, the RPM automatically keeps on rising as if its accelereating on its own. Mods are 2.9L whipple Vortech Fuel pump booster Ford racing throttle body JLT GT500 C/F CAI...
  12. S

    Oil in whipple intercooler reservoir ??

    Did anyone come across this situation ? yesterday I was tuning a Mustang GT with whipple supercharger and just as I was about to wrap it up with timing I stopped for a check on everything just to make sure there is clean engine oil, coolant and intercooler water. I was shocked to see that...
  13. S

    5.0 with D1 installed

    Hey, Planing to build a 2011 auto with D1sc procharger kit. I'll get the tuner kit + Seimens deka 75 injectors + ARH 1" 7/8 offroad longtubes and a 3.73 to get'r spining and no delay since it has the 3.31. Just wana know if there are any recomendation.. Off course I am planing to set up...
  14. S

    Car MAF Problem ? kenne Bell

    A friend of mine had an accident on the front passenger side. and after it was fixed they had a hard time starting the car.. So we changed few fuses, relays and the Black box on passenger foot. The car started fine but once you hit the throttle it just bogs down and dies. So we changed the...
  15. S

    After market rollers and lifters ?

    I'd like to know what kind of aftermarket cam rollers and lifters is everyone using and what do you think of them ? And what kind of Valve springs are recomended with Comps SPR STG 3 ? ... Thanks.
  16. S

    Used 2010 GT500 or New 5.0L ?

    I am really curios over here and I need your help. The 5.0L isnt out yet here in U.A.E and I know that motor has potential.. Its just I have this sick deal for a 2010 used GT500 which has around 6,000 miles and these mods. Upper pulley Lower Pulley 10% over drive ARH Long tube headers JLT...
  17. S

    06 Auto going off just like that ?

    a friend of mine has so bolt ons on his auto GT JLT 3000 TC ( precision industries ) 3.73 CMCV UDP and his tune is fine and car drove amazingly fine until he sold it. the new owner is also a friend but i don't know what did he do to it.. I retuned his car and car worked fine for a couple...
  18. S

    Will the stock Block handle this setup ?

    My dream is to have the 5.4L aluminum block fully built with custom cams and twin 62 turbos.. Unfortunatly I don't shit cash. So for the mean time here is what am thinking of. 5.0L stroker with 8.7:1 CR ( will bigger strokers be fine ? ) BBR custom turbo cams Livernois stg3 P&P heads all...
  19. S

    8-bolt flywheel with TR-6060

    I am installing a TR-6060 on a friends Saleen mustang and he has the 8-bolt forged crank.. So I was wondering.. should I get him the GT500 clutchs ? I was thinking of mcloed aluminum flywheel with the Mcloed RXT twin plate clutch.. PLease give me feedback .. Car is making currently...
  20. S

    Mcleod Clutch

    I want to know more info about this clutch and what do people think of it ? We have tried all spec clutchs and now am deciding to change. Mcloed is the one that am thinking about and would like to know if there are any issues with it.. Thanks.
  21. S

    Tr-6060 problem on a GT ?

    I managaed to get a TR-6060 ( Used for about 400 miles ) but with New clutch plate and new shifter, The transmission was installed perfectly, so when it's time to test it out. I turn the car on, on neutral it was fine. so I had to reverse the car and it went on reverse soo smoothly and nicely...
  22. S

    Logans 3v Intake Manifold

    I came across this. any good info ? dyno charts ? price ? http://www.loganmotorsports.com/logan_manifold2.html
  23. S

    Whats the biggest S/c for a 4.6L ?

    Hi, a friend of mine is rebuilding his block to go badass F/I so I wanted to know whats the biggest and badest S/C we can install on the 4.6L block ? Thanks.
  24. S

    Do my L/T'S need heat wraps ?

    I just got me self a set of catless long tube headers and was wondering is it actually better to wrap them with those heat wraps ? thank you
  25. S

    Shifting issue @ High RPM

    We recently installed a pro 5.0 shifter on a 2005 Mustang GT and when racing or at high RPM the gear for example from 2nd to 3rd dissengages but won't engage to third, even If i used all of my power to strongly shift. as if like there is something blocking it. but when at normal speed and...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top