Search results for query: *

***Scroll down to see videos in replies*** For sale- 2006 Mustang GT Premium- Supercharged/ Built Engine (3v 302ci)/ 6 speed/ Highly Modified. 32,000 miles on car. Weekend warrior but only took it to the track a few times. I have been the only owner of the car since buying it new in 2006. This...

Looking for some 3v valve covers quick!

I did a search and came up with some ideas but nothing definitive. The post I found was 3 years old so I thought I'd ask and maybe some people have different ideas. I powder coated the valve covers and now some bead blasting particles are in the baffles. Is there a good way to take the...

To be honest, I didn't spend the time to look this question up because it's just a yes or no question and I'd rather not spend the 20 minutes trying to find the answer. I have to switch out my timing cover and was wondering if I would have to uninstall the meziere water pump since the pulley...

Here’s the story…I did a wire tuck a couple of years ago, everything has been working great, until now. I’ve been experiencing a fuel pressure issue. I thought at first it was the pump, so I switched it out, still nothing. Went on to the FPDM, switched that out, nothing. I then moved on to the...

Ok, my car has been going into limp mode and then shortly after I get a P0102 code, being the only code I receive. I'm assuming it's my MAF (I have a Saleen Velocity MAF). Before I spend the time to find it first of all, then dish out the $200 or so, I want to check everything out first as to...

Selling a Edelbrock High Flow Waterpump. Bought it for an experiment, only has maybe 300 miles on it. As you can see, the design is far superior than OEM, allowing for more gpm. SOLD

I have for sale a blue thump RRR tensioner, part# PM-1002-00. This is one of their anodized models that they no longer offer. Asking $175 shipped Also for sale is a Thump RRR 90mm double bearing idler pulley, part# PM-2090-D. Again, one of their models that is anodized blue that are no longer...

This was taken off my 2006 GT in order to get a bigger water pump pulley so I could achieve better belt wrap around my supercharger pulley for more consistent boost. I love this pump and the new pump I got was also a meziere. The pump works just fine and I've had it on my car for about 10k...

Everything you need to make a gt500 dual fuel pump upgrade except the wire harness. I have for sale the gt500 dual fuel pump, used. Also for sale is the gt500 FPDM. Everything works fine. I replaced the pump thinking that was the problem with my fuel pressure issue. It wasn't. Turns out it was...

So....I had a problem where the car would turn over and then immediately die. Happened for a couple days, tried again, car started and ran great all day. Next day, car started and then died about 10 seconds later. After that I continue to get 0 psi on my fuel pressure gauge. Changed the pump...

Have a KOOKS 3" Catless H-Pipe with 2.5" outlet F/S. Has a little bit of road rash pictured and price reflects that. This sounds absolutely fantastic. Specific information and fitment is found here http://www.steeda.com/kooks-3-x-2-1-2-oem-exhaust-off-road-no-cats-h-pipe-05-10-gt-515-11313410/...

Custom S/C coolant tank bought for $165 but never installed because I went with a trunk mounted tank. This tank will not fit GT500's or roush front fascia's. Replaces windshield washer reservoir tank. Comes with installation instructions. Asking $100 shipped Second is a moroso battery location...

31 Spline Detroit trutrac for sale. I bought it off a forum member who had about 3K miles on it but never had it installed. Reason why I am selling it for so cheap is because the installer said it wouldn't work because it had been machined on. I live in a place where there are only a couple...

SOLD I have for sale a slightly used FRPP GT500 throttle body w/ adapter plate for the GT's. I bought it off a forum member but unfortunately never could install it. The extra 2 inches or so between the addition of the adapter plate and the reducer tubing would not allow clearance of my...

I live out in the middle of no where and the shops here are either shady or too busy to do small items. I was wondering if anyone here has a shop that would be willing to paint my SHR fuel door HP white and my radiator expansion tank CAP G9 Vista Blue. It would be nice to have no longer than a 2...

Need some 05-09 pigtails guys. Specifically all the front lights...i.e. headlights, side marker lights, and blinkers. Also need the female tps sensor (pretty sure that's it, it's the harness that connects to the p/s of the t/b). I don't remember if that's the tps sensor or if it's the connector...

I have a pair of brand new Raxiom 2010 style tail lights for the 05-09 models. Uses your existing lights and harness. Asking $115 shipped. I literally only installed them before my car went in for some paint. I got a good deal on the 2014 style lights while it was in the shop so switched them...

Welp, DRock posted the vented fenders before I could so I do apologize haha. I've been working on this project since August and researching how to do this since the beginning of last year, so it wasnt my intention to copy cat. Anyways, with some reading from these great forums (mainly from one...

So I have a quick question. I've been reading here and online about how exactly a compression test and leak down test is performed. I want to get one done before I have my car remote tuned so I know the overall health of my engine and give my tuner all the info he needs. Reading how everything...

So I already know this is a silly question and I already know the answer but I'm going to take the plunge in the shark tank and ask anyway. Reason why I ask is because I've never seen anyone do it so my brain says to me, "must be a reason". Anyways, I'm in the process of converting my 06 front...

Wtb: Techco intake Was wondering if anyone had this unit floating around that wanted to sell it. Long shot but thought I'd give it a try. Thanks Edit....title was a mispell. TECHCO intake

Got some stuff for sale. All prices include shipping and are located in Fort Riley Kansas. Dirt cheap prices, 20-30% the price of new. CDC billet grille.-sold Halo/ projector headlights including light bulbs $70 MAC SS radiator cover.- sold This picture shows all the pieces on my car

I have a cervini heat extractor hood for sale. Fits 2005-2009. Great condition. Has one paint fracture (in picture) and one of the vents was modified to be able to clear my supercharger. Still functions fine and looks great. Also included is cervini hood struts that are specifically designed to...

Like the title says. Looking to see if any vendors have a 10-14 Shelby GT500 Super Snake Front Splitter. Part number S10M-16601-CSS. All the sites I have seen say they are out of stock or discontinued.