Search results for query: *

I have a 10'x12' shed and have been looking for a viable light solution since I have no electric and don't plan on running electric. It's getting dark early now and I just need enough light to put things away. I am not planning on working out there. Just need some light for the few times I get...

I have lived in my house for 4 years (house is 15 years old) and the deck is ready for a restoration., When I moved in, I had a guy power wash it and stain it about a year after moving in, but it hasn't held up like I expected. The boards are faded, tiger striped and some are cupped. I was...

Does anyone know much about how these things work? I bought one last year from AutoGeek and it worked flawlessly. I took it out this year and so far it is not working. It will spay a soapy water mixture, but not make the foam. My pressure washer is still working properly and I am using Chemical...

np_PySjoFfk

Just a few quick shots from my phone of my daily driver. I am trying out Collinite 476s this winter. Gave the car a quick wash and a coat of Collinite. Didn't know what to expect for results but was pleasantly surprised. In the spring I will go whole hog and do a full detail.

Bought a set of valve covers to get powder coated so I had no down time. Now one lucky guy can do the same thing! Buy these and send them out for coating. These came off an 06 Mustang GT. Rubber gaskets and PCV gaskets are included. Asking $100 + shipping.

Used this flange when I had my Spydershaft installed. Went to a different drive shaft that used the stock pinion so this needs to go. Asking $25 shipped.

**SOLD** Moroso SC Coolant Tank This is the tank that goes in place of your battery. I bought this tank for a custom install in the air filter location for my Saleen Super Shaker setup, but ended up going with a custom tank instead. Asking $100 shipped...

** SOLD** 05+ Quantum Racing Brake Ducts Had these on my car for the few track days I have done. I haven't been to an open track day for a few years and these have been sitting. This is the 3" ducts rated to 650 deg F. I also have the 05-09 Air Inlets for the stock fascia. Asking $130 shipped...

I have 2 8 rib pullies sitting on the bench for a Saleen blower. 1 - Reichard Racing 8 rib 3.4" 1 - JDM 8 Rib 3.1" Asking $50 shipped per pulley.

**SOLD**: 05-2010 Fays2 Watts Link Had this on my car for about 4 years. I took it off and gave the frame a quick coat of Krylon so it would look better. I also ordered new rod ends and have 2 sets of the rubber o-ring noise suppressors and also have the revised notched axle tube clamp. I was...

**SOLD** 05-2010 Thump RRR Racing Billet tensioner Took this off chasing a chirping noise and never reinstalled it. Noise turned out to be misaligned alternator pulley. Ended up with a Roush tensioner so this has been sitting. Used for about 2000 miles. 6 rib, 76mm pulley is attached. This is...

SOLD: BMR 05+ poly/poly LCA's Had these on my car when it was a daily driver. The bushings look good but some of the powder coat has chipped off. I tried to take the best photos I could to show the current condition. Looking to get $85 shipped...

****SOLD**** 05-2010 BMR Adj UCA BMR Adjustable Upper Control Arm, new bushings installed, spare set included. Set to stock length. http://www.bmrsuspension.com/?page=products&productid=163 Asking $125 shipped.

I have had a vibration in the rear and my shop keeps insisting he has my pinion angle at -2.5 degrees. So I decided to check myself. Here is what I found when I put the car on four ramps and used a non-digital angle finder and a metal carpenters square so I can read on the protractor in the same...

I have been battling a belt squeal in what seems like forever. At this point in time, I have changed the alternator, alternator bracket and all of the idler pullies (used Thump Racing, pullies from NAPA and the pullies GI Joe provides in his 8 rib kit) and the belt tensioner (tired stock, Roush...

Need a little help guys. I had my torque converter changed for a Circle D. The shop that did the work had done trans work for me in the past with no issues. After driving the car and getting the fluid hot, the next morning I will see a very small puddle under the car which I thought should...

My niece inherited her brothers 1995 Mustang. As you can see it was in rough shape. I don’t think he washed it once in the 5 years he had it nor did he vacuum it. I found all kinds of nasty shit under the seats, the best being a foam plate with dried roast beef on it. No wonder he had multiple...

I have been detailing my Niece's 1995 Mustang (will post pictures soon, waiting for the sun to come back out) and used the Ultima Tire & Trim on her trim and tires. It looked great until the product dried and now it looks a little streaky and kind of dull. I am not sure if I did something wrong...

I bought a new laptop and cannot get Live Load or Live Link 6.5 to recognize my Xcal2. I downloaded all software/drivers from http://sctflash.com/showdeviceupdates.php?PNID=9400&DTYPE=. When I plug in the usb cable, it tells me that my drivers are installing, then says not recognized. When I go...

Long story short I have had a chirp that I tracked down to my alternator. I have a new alternator from Ford and a new Saleen alternator bracket. I also double checked with GI Joe how the Saleen alternator bracket should be shimmed with his 8 rib kit. Everything is setup correctly. I borrowed...

I bought a JVC head unit and can't get the light dimming features to work. I can program the radio to have one color and brightness for the day and completely different colors/brightness for night. Problem is I can't get the radio to dim when I turn on the headlights. I have a 2005 Mustang GT...

I finally found the source of my chirping that I have been chasing for the past year or so. My Saleen alternator mounting bracket is slightly bent and causing a misalignment as well as a sightly bent alternator rotor shaft that actually has a squeak when you rotate it by hand. I also noticed...

Does anyone have a Saleen alternator bracket laying around? I have been chasing down a chirp and finally traced it to a bent bracket and the alternator shaft is slightly bent also. I am hoping someone has one sitting around so I don’t need to go through Saleen.

I went for a quick drive today at lunch in my Mustang. The steering felt very weird. When I got home I jacked up the front and I saw oil/wetness on both inner tie rod boots. I then tried to turn both wheels manually with the keys out of the ignition and the wheel locked. I can turn the left...