Search results for query: *

With all the speed bumps and steep driveways in this town, im just tired of scraping over everything. I put in old style u clamps on the exhaust just so they scrape first before anything else. My question is, can I keep the front lowered and put the stock springs in the back, then go with a...

So a year ago, I installed a 2012 steering wheel in my 05 so I could have stereo controls on the wheel, and it's just a much nicer wheel. I got the stereo controls working great. But my cruise gives me a code about the circuit being hi. I assume resistance. I've resoldered the connections but...

Would like a set of Detroit rockers or hotrods, or any cam thats nsr. Let me know what you got! Thanks! Edit: For an 05 4.6L 3v

Bored tonight so started piecing together what I have of my sound system so when the car comes out of storage it will mostly be a plug and play affair. Here's where I am so far, and each component is on top of its instructions, just want to make sure all is well so far. Its an appradio 3 in...

Found a good deal for a gt500 cluster, in km/h cause I am in Canada. Hard to find these up here. But its from a 2010, has anyone got one to work? I heard the back pin is different from searching: http://www.s197forum.com/forum/showthread.php?t=88982&highlight=2010+gt500+cluster Same cluster...

2013 premium wheel in an 05 Now Ive seen and read all the steering wheel swaps here and many other places. But havent seen one for this particular wheel. Its a 12 or 13 premium wheel Im pretty sure. Got a great deal from a local performance shop so picked it up. Now actually looking at...

On my 05, was going to order a new deck from crutchfield and it asked if I had the base 4 speaker system or the shaker 500/1000. I know I dont have the 1000 (no subs in trunk) but I do have door subs, on the bottom front of door. Does this mean I have the shaker 500? I ask because...

I bought my car with the Eibach pro kit like 3 or 4 years ago. It was installed by the previous owner in 05. So the springs have been in for almost 10 years. It rode like a lumber wagon, then noticed he didnt cut down or replace the bump stops, and there was practically no room between the frame...

Emission Monitor Status's and Offroad H So Ontario Canada etest is a simple obd2 test, no CELs and checks to see that everything is ready under the monitors. I have a scan tool to check the monitors. We are allowed 1 "not ready" status. Last weekend at the drive in (of course a few days...

So last weekend I installed Freedom racing UCA (for lowered cars), freedom racing adj panhard bar, BMR LCA and relocation brackets and a DSS driveshaft with a dynotech adapter plate. Since the car was lowered I did everything I could think of to correct the suspension geometry changes...

K long story, here goes. My car (05 gt) when I bought it had a ducktail spoiler (CDC I think it was). It kept warping in the summer and I would have to constantly adjust the side pieces to match the trunk part. Got tired of it. This winter got a great deal on a roush 3 piece. It was blue...

Hey all, bought a used driveshaft off a local source. Said it was off his 08 mustang. It didnt come with a flange adapter so I ordered one from the driveshaft shop. But as I was looking through their website, I noticed my driveshaft doesnt look like any of theirs. Is this an old model?

So the previous owner had an aftermarket wing on. Drilled 8 holes in the trunk lid to put it on.... Bought a roush spoiler, and figure buying a trunk lid and painting it would be cheaper than bodywork+painting it. So looking for an 05-09 trunk lid, if it was UA black be all the much...

Want some chrome exhaust tips, but my mustang isnt parked at my place to measure things. Coming out of the muffler, the pipe is 2.5", correct? And the outlet is 4"? Also I would need short tips right? Alot of these tips are like 12" long like at...

Has anyone here taken these housings apart? Did it require a bake in the oven to loosen the glue? Better yet, anyone have pics of the inside of the housing, specifically the inside of the outside lens? Have an idea I been kicking around. Thanks!

Has anyone here had any experience with these? http://forums.corvetteforum.com/c6-tech-performance/2803010-wheel-adapters.html shows an example, they allow the seat to move 2mm to either side. Reason I am asking, I have an aftermarket staggered setup, 8 and 9". I want 10" in the rear...

Finally made it down to the track. Man that was alot of fun! Definitely need some driver mod though! Best was a 13.7 and best mph was a hair under 103. And a 2.0 60ft. This is on street tires of course. Launch at 2k rpms, any higher and the tires would blow loose. Mods are JLT2 cai...

Ok so i am installing tokicos. Therw are 2 bolts that attach the strut to the spindle. both of ththem i have removed the nut. bottom bolt i have slid out also. but both sides top bolt will not come out. broke the head off one side. the bolts themselves will just not spin. aapplied tons of pb...

So bought a set of pypes LT headers and OR H-pipe. After 8 hours, (on and off, helping my brother with his car too) have the passenger side installed. Mid pipe came out easy enough, along with starter and steering shaft. Took the passenger motor mount bracket off, and jacked up the engine...

So I bought a set of used Roush louvers locally (even in my color, couldnt pass it up). Got all the hardware but no templates or instructions. I plan to clean the window with alcohol, then use adhesion promotor. With the double sided tape left on, line up the louvers and use a marker to mark the...

So car has been tucked away at a rental place waiting for spring, was thinking bout moving it to my place next weekend. I want to prime the engine with oil, and with searching found http://www.s197forum.com/forum/showthread.php?t=73305&highlight=prime+engine which led me to...

I see in my local classifieds someone is selling a new frpp rear sway bar for $60. Just the bar itself. No bushings or anything. Can I use all my existing hardware to install it? Sounds like a good deal. Bar is 22mm, stock is 20mm. Just looking for some info, and not from the seller lol...

Guess Cruella de Ville needed a few more hp. [/IMG]

Was alot of great sales this weekend from many (all?) of the sponsors, and even though Im canadian I had to get something! Bought some pypes LTs and H pipe, couldnt pass the deal up! What'd you get?

Ok so I bought a set of BNIB tokicos from a guy living about 2 hours away, he bought them and never installed. They didnt come with an adjuster tool, but thats fine. I used an allen key, just to make sure everything was working. When I go full hard (clockwise) I feel it stiffen up near the...