- Joined
- Jun 6, 2016
- Posts
- 94
- Reaction score
- 6
FX-R 3.0 iirc, 3" lens.
I used threaded rods through the mounting holes, and drilled holes through the reflector's and used nuts on each sides and aimed roughly forward, and wound up about right.
Only thing is the beams cross eachother probably 30 feet infront of the car instead of pointing truely forward, but they at least point forward and semi level
If you used the nut and bolt method, you can adjust the points to get them better aligned. Or adjust your reflector. For the FXR, the common thing to seal the back is with epoxy.