Blower spacer plates

[Oneslow50]

Anyone interested in thermal spacers for their 4.6 or 5.4 3v blower cars and trucks send me a DM. I need 20 people interested for the company will produce them.

 

[DieHarder]

Sounds like a good idea. Any idea if adding spacers will require a tune? You might want to post proposed drawings/specs/heat resistance numbers/etc.

Already have this myself when I installed DOB's second gen intake manifold that kind of a spacer was an option you could select. Works great BTW.

https://www.departmentofboost.com/gt450-450hp-intercooler-system-components-and-packages/

 

[stkjock]

Not tech, moved, cavet emptor

 

[Oneslow50]

If we get 20 people together I will provide the company with a stock set of heads, stock manifold and gaskets for them to make the plates. Plates that they make for other engine families are 3/8" thick, o-ringed on the head side, blower side will be sealed using what ever gasket your blower uses. Plates will include the coolant passages at the front of the heads.

 

[Oneslow50]

It would be great if DOB would sell their plate separately but last time I contacted them they said the would not sell by itself.

 

[Oneslow50]

Dropping the heads and intake off on the 3rd of March so they can start the RD work.

 

[Oneslow50]

RD work is done on the spacers money has been payed expecting the plates to be available in January of 2024. They should have 35 sets available.

 

[Oneslow50]

Blower spacer are now available 35 sets available.