mustangtcs
forum member
Background on car. 05 GT Kenne Bell 2.6 9lbs. Lund tuned 460rwhp 450rwtorque. 4.10 bmr lowers and relocation brackets. Automatic w stock stall. Dynotech driveshaft. M&H Racemasters.
May 30, 2014 I took the car to Atco for the first time ever. Ran 11.96 at 114 with a 1.7 60ft and no spin. IAT's were 150. Tune started pulling timing at 130.
After this I installed the Afco dual fan heat exchanger and Lund adjusted the IAT's to pull at 140. Also I had a bog if I stabbed the gas from idle and he fixed that also.
August 24, 2014 Back to Atco. I ran the car and the IAT's were 120 so not pulling timing and the 60ft was again 1.7. 12.06 at 111 mph. Disappointed I ran two more times and no kidding I got 12.06 at 111 mph every time.
My problem is I thought the car would be faster now that I have full power and not pulling timing. I feel as if the mph is not reflecting the hp I am making. In May the car was pulling timing before the run even started. Now the car never pulls timing and I have logged and checked and it stays at 19 with no fluctuation at full throttle to redline. I'm not sure what to do?
May 30, 2014 I took the car to Atco for the first time ever. Ran 11.96 at 114 with a 1.7 60ft and no spin. IAT's were 150. Tune started pulling timing at 130.
After this I installed the Afco dual fan heat exchanger and Lund adjusted the IAT's to pull at 140. Also I had a bog if I stabbed the gas from idle and he fixed that also.
August 24, 2014 Back to Atco. I ran the car and the IAT's were 120 so not pulling timing and the 60ft was again 1.7. 12.06 at 111 mph. Disappointed I ran two more times and no kidding I got 12.06 at 111 mph every time.
My problem is I thought the car would be faster now that I have full power and not pulling timing. I feel as if the mph is not reflecting the hp I am making. In May the car was pulling timing before the run even started. Now the car never pulls timing and I have logged and checked and it stays at 19 with no fluctuation at full throttle to redline. I'm not sure what to do?
Last edited: