rkaiser
Junior Member
Hope the attached is helpful to those looking to do this conversion. It didn't take long to do, as long as you have all the parts:
You need an the following tools:
*Requires Bolts / Clip_nuts
**Requires Rivets
You need an the following tools:
- Flat Head Screwdriver
- Phillips Head Screwdriver
- socket wrench
- 5mm socket (Lower shield)
- 8mm socket (Left & Right GT500 mounts)
- 10mm socket (GT500 Air Splitter)
- Front Bumper Assembly
- Front Air Splitter*
- Front Grille Assembly
- Lower Grille
- Center Bumper Support**
- Left Conversion Bracket*
- Right Conversion Bracket*
- Isolator Assembly
- Front Grille Emblem (optional)
- 2 Fog Lights w/ Bulbs
- Fog Light Wiring Harness
- GT500 OEM Hood
- GT500 Radiator cover
*Requires Bolts / Clip_nuts
**Requires Rivets