Finally...

[Steedman07]

11.84 at 115!! Thanks for the Steve @ Dez racing... You da man..now let's see if I can't get an 11.7x next pass. I can get the 1.88 60ft down..

 

[JEWC_Motorsports]

congrats.

 

[DKS]

Hell yeah bro!

 

[Steedman07]

Only made 2 passes today, but I got my damn 11..And with the 1.88 60 ft., there is more E.T. in it..I had to heat up the Nitto's for a good 8-10 seconds, andit hooked pretty good. Thanks again Steve for your killer track support and Nascar style of helping me change the fronts, lol..I am still a little stumped about my MPH though..I ran a 12.04 @ 115.65 at LVD with a 1.87 60 ft..Since then I put in a 3.48 pulley, picked up about 21 whp, and my 60 ft. today was a 1.88, and I ran a 11.84 @ 115...I am stumped.The only thing I can think of is the 2 tenths better in ET was from the better torque curve with the pulley swap and the lighter front wheels..I dunno

 

[NotQuik]

The 1/8th mile mph the same as the previous best? Congrats though

 

[Steedman07]

The 1/8th mile mph the same as the previous best? Congrats though

This time it was a 7.63 @ 92.20..Previous best it was a 7.73 @ 90.59..So ya, it picked up 2.4 mph in the 1/8th, and 1/10th..

 

[06silverbullet]

very cool dude, congrats on one hell of a fast car.

 

[SteveP]

So proud of you bro!!! Glad I could help. Getting you into the grove on a very sticky track was the key. And making those nittos stick was what you needed. Next time its mid 11s!!! Any time you want to use my slicks and skinnies, just let me know bro.

 

[Steedman07]

very cool dude, congrats on one hell of a fast car.

Thanks, but it was one of the slower ones there today, lol..

So proud of you bro!!! Glad I could help. Getting you into the grove on a very sticky track was the key. And making those nittos stick was what you needed. Next time its mid 11s!!! Any time you want to use my slicks and skinnies, just let me know bro.

You will be seeing my car at Dez this winter, and in the Spring I will work on mid-low 11's, and you can work on mid 10's!! You da man..Thank you again..Whe you are ready to buy a car, you will get the deal of the century...

 

[SteveP]

sweet lol

 

[Shades]

Congrats!! I know how long you've been after that 11 second slip..what track did you break it at?

And kudos to Steve for the help!

 

[07TGGT]

Badass.

 

[SteveP]

Congrats!! I know how long you've been after that 11 second slip..what track did you break it at?

And kudos to Steve for the help!

Epping, NH

thanks

 

[Steedman07]

Congrats!! I know how long you've been after that 11 second slip..what track did you break it at?

And kudos to Steve for the help!

Ya, a fucking year and a half!! Today, there were no excuses..The weather was great, the track prep was great, my car ran great with the new pulley..Except for the 2-3 shift bouncing off the limiter, everything was on my launch today. Steve got me in the groove prefectly on my second pass..The rest was up to me finding the right rpm to leave at with the foot brake..But I know the car with its current set-up has an 11.60-11.70 in it..I just have to do it..

 

[Five Oh Brian]

Outstanding! Welcome to the 11 second club! Looks like it was all in your short times as your 1/8 mile ET was a tenth quicker. Must be more torque down low. Get that 60' down a bit and you'll see the 11.60's and 11.70's before too long.

 

[stkjock]

Billy - the fronts were def good for .1 IMHO.

Congrats again on the 11s

 

[SteveP]

Moroso DBS-2 skinnies FTW!

 

[Steedman07]

From here on out I am running big and littles..My Steeda "ultra" light rims are not light, lol..I am going to have the tranny tune tweeked so it doesnt bounce off the limiter on the 2nd to 3rd shift..And just more practice launching...

 

[pacettr]

Congrats! Great weekend for racing...


http://www.s197forum.com/forum/showthread.php?t=44970

 

[SteveP]

From here on out I am running big and littles..My Steeda "ultra" light rims are not light, lol..I am going to have the tranny tune tweeked so it doesnt bounce off the limiter on the 2nd to 3rd shift..And just more practice launching...