Found these on Ebay... What do you think?

[sSsmokin!]

Size: 2 Front Rims are 18X8.5 with +30 offset​

Size: 2 Rear Rims are 18x10.0 with +25 offset​

Bolt Pattern: 5x114.3 & 5x120​

Thinking of pairing them with my current tire setup 275/35 Front 295/35 Rear. What do you think?

 

[killr3v]

Look pretty good to me. What's your car look like?

 

[Kankakee]

Those are the same wheels a guy on here named Antonio has.

 

[AJ]

talk to antonio1988

 

[TonyGT]

talk to antonio1988

+1 need to have the hub shaved to fit those ask Antonio how much he had shaved off I forgot.

 

[sSsmokin!]

Will do thanks guys...

 

[TonyGT]

Will do thanks guys...

No problem man. How are those macs treating ya?

 

[sSsmokin!]

No problem man. How are those macs treating ya?

Real sweet brotha! Now i gotta start saving for those longtubes lol probably going to paint the MACs black if i go with these wheels.

 

[peetiewonder]

xxr makes decent wheels especially for the money.

 

[Kaldar142]

^ Formally known as sportmaxx i believe

 

[peetiewonder]

^ Formally known as sportmaxx i believe

formerly, yes.

 

[iDance]

+1 need to have the hub shaved to fit those ask Antonio how much he had shaved off I forgot.

5mm

And he said he could do them somewhere in the $800-900 range shaved and shipped.

 

[TonyGT]

5mm

And he said he could do them somewhere in the $800-900 range shaved and shipped.

Yup i just looked up the thread he said $800 dollars at the place he got his done in Florida for the 18x9 and 18x10.

Check this out post #22 the second one on the page
http://www.s197forum.com/forum/showthread.php?t=34243&page=2

 

[antonio1988]

5mm is what I shaved off and I, in essence, achieved the same desired offset that we get when putting 99-04 mustang wheels on an s197.

Examples are shockwave I believe and mikeysgt of what these may look like in terms of offset in the 18" versions

BTW those rears are only 25mm offest, the ones I can get you are a 30 mm offset (add the 5mm hub shave and get them to 35mm). Those that the OP listed will stick out quite a bit in the rear.

 

[908ssp]

Great looking wheel but the offset is wrong for the rear. Seems some guys here can help. My 11" have 45mm of offset and they just clear.

 

[peetiewonder]

+35 offset in the rear should be damn near perfectly flush.

 

[antonio1988]

+35 offset in the rear should be damn near perfectly flush.

Actually, you're right! I just remembered that mine are 10.5" wide out back, the 18s are only 10". So the fit should be perfectly flush

 

[sSsmokin!]

So essentially when looking for a wheel, what offset would I need to achieve the "flush" fender look for both front and back?

 

[pieperz06]

So essentially when looking for a wheel, what offset would I need to achieve the "flush" fender look for both front and back?

depends on the tire size

 

[peetiewonder]

So essentially when looking for a wheel, what offset would I need to achieve the "flush" fender look for both front and back?

depends on the tire size wheel width and your front camber.

i'm running 19x9.5 all around +29 rear with 275/40 tire and its pretty much flush im running +21 front and its sunken a little bit because I have a 255/40 tire with massive camber... it really depends on your setup.

18x10 +35 would be equivalient wheel space wise as my 19x9.5 +29 and the tire should sit close to the same with with like a 285 on it.