Carlos0698
Junior Member
hi, thanks for looking at my post.
im having this issue since a year ago with the engine last engine built. yes, that failure fried that built engine with cams,pistons etc. now i got an 28k miles engine from lqk and installed it. im having the same p2195,p2196,p2197,p2198. have replaced the TB for a GT500 60mm, it have the bbr tb spacer too. an c&l street intake, steeda cmdp, FRPP 24lb/hr injectors, jba short header and an akrapovic evolution exhaust. all those parts where installed on the other engine too. first i have replaced the front o2 sensors thinking that was the problem. codes turn on after 50k miles. have an bama tune for the parts. replaced the maf. i have an aem wideband that shows rich to lean loop sometimes.i got 13.5-16.0 readings but car got again. im going attach what i got with the obdII port on my phone. sorry for my english too. im planing to put an on3 turbo but first i need to fix this problem
im having this issue since a year ago with the engine last engine built. yes, that failure fried that built engine with cams,pistons etc. now i got an 28k miles engine from lqk and installed it. im having the same p2195,p2196,p2197,p2198. have replaced the TB for a GT500 60mm, it have the bbr tb spacer too. an c&l street intake, steeda cmdp, FRPP 24lb/hr injectors, jba short header and an akrapovic evolution exhaust. all those parts where installed on the other engine too. first i have replaced the front o2 sensors thinking that was the problem. codes turn on after 50k miles. have an bama tune for the parts. replaced the maf. i have an aem wideband that shows rich to lean loop sometimes.i got 13.5-16.0 readings but car got again. im going attach what i got with the obdII port on my phone. sorry for my english too. im planing to put an on3 turbo but first i need to fix this problem