Ok, got a turbo and built motor installed but need a tuner..

stkjock

---- Madmin ----
Staff member
Administrator
Super Moderator
S197 Team Member
Joined
Jul 10, 2007
Posts
40,260
Reaction score
3,172
Location
Long Island NY
Can i get a little more info on this remote tune?? how does it work? I have a local dyno that would probably let me pay for a couple pulls to have Lund tune it!


You get a base tune file - load it

Dyno pull w/ data logs

email data log to Lund (any tuner)

revised/tweaked tune emailed back

upload update tune

dyno pull w/ logs

email logs...... repeat until done.
 

Redrocket06

forum member
Joined
Jun 23, 2008
Posts
788
Reaction score
3
Location
Alvin, TX
It is rated at enough CFM to produce 1500 hp, i def plan to push it!
If you ever are in the Houston area after you have that turbo doing all it can do, I need to get you together with my buddy. He has a built 01' Z06 with an 88mm, the turbo is maxed out...1200 rwhp. Would be a great friendy dash.
 

BTrinanes

Junior Member
Joined
Dec 7, 2011
Posts
31
Reaction score
0
Lets see some pics of the exterior, you were going with the Saleen bodykit/wheels right?

Unfortunately I only have pics he sent me but I don't have any completed pics yet until it gets home and I have them repainted. ImageUploadedByTapatalk1344036106.563506.jpg


Sent from my iPhone using Tapatalk

What state?

I'm in mass as well. I live in Bridgewater.


Sent from my iPhone using Tapatalk

If you ever are in the Houston area after you have that turbo doing all it can do, I need to get you together with my buddy. He has a built 01' Z06 with an 88mm, the turbo is maxed out...1200 rwhp. Would be a great friendy dash.

I do plan on hitting the mile with it as soon as its completed :)


Sent from my iPhone using Tapatalk
 
Last edited by a moderator:

S197gt07

forum member
Joined
Jul 7, 2010
Posts
4,064
Reaction score
1
Location
Newburyport, MA
I'm in mass as well. I live in Bridgewater.

4 places "close" by

Chris @ MPE - MA
Mike @ DEZ Racing - MA
Pete @ Performance Dyno - NH

There is also EFI Logic's in CT

I'm confident in each of these guys ability's to tune the car. Perhaps give them a call, and see how comfortable they are with your setup.

My tune is from Pete, and I know he's tuned 800+ RWHP cars before.

Personally, and this is not dissing lund or lito, I think you have the talent in the area to get your car tuned from a local guy.
 

2kblacksleeper

Junior Member
Joined
Aug 15, 2010
Posts
43
Reaction score
0
Location
Cincinnati, Ohio
I saw some of your build pics on yellow bullet. It looks killer. I like the tanks they built in the rear.
I look foward to hearing your numbers.
 

stkjock

---- Madmin ----
Staff member
Administrator
Super Moderator
S197 Team Member
Joined
Jul 10, 2007
Posts
40,260
Reaction score
3,172
Location
Long Island NY
so if I use a local dyno, do I have to make sure they have SCT software as well?

I don't think so. If u r just renting the dyno and u r doing the pulls,,u would need a laptop with the SCT software and a handheld, as well as Internet access
 

BTrinanes

Junior Member
Joined
Dec 7, 2011
Posts
31
Reaction score
0
Cool. Thanks for the suggestions guys. I'll have numbers up soon. I got about a weeks worth of stuff to fix on the car and I'll have her ready for the rollers, then off to the chassis shop for a stealthy cage then track!


Sent from my iPhone using Tapatalk
 

BTrinanes

Junior Member
Joined
Dec 7, 2011
Posts
31
Reaction score
0
Lets see some pics of the exterior, you were going with the Saleen bodykit/wheels right?

I finally got it all cleaned up and put back together.
c6e4c891-f4a7-2cd3.jpg



Sent from my iPhone using Tapatalk

Ooops..ImageUploadedByTapatalk1345778912.054769.jpg


Sent from my iPhone using Tapatalk
 
Last edited by a moderator:

weather man

Persistance Is A Bitch
S197 Team Member
Joined
Mar 3, 2012
Posts
13,335
Reaction score
152
Location
MN
That is a really clean looking car.
 

Mike Rousch

Member
Official Vendor
Joined
Sep 30, 2009
Posts
369
Reaction score
0
Location
Richmond,VA
4 places "close" by

Chris @ MPE - MA
Mike @ DEZ Racing - MA
Pete @ Performance Dyno - NH

There is also EFI Logic's in CT

I'm confident in each of these guys ability's to tune the car. Perhaps give them a call, and see how comfortable they are with your setup.

My tune is from Pete, and I know he's tuned 800+ RWHP cars before.

Personally, and this is not dissing lund or lito, I think you have the talent in the area to get your car tuned from a local guy.

+1 for Dez, Or if you do decide to use someone else fly them in there, You have a ton of money tied up and dont skimp on the most important part!

Awesome car!
 

BTrinanes

Junior Member
Joined
Dec 7, 2011
Posts
31
Reaction score
0
Thanks for the compliments guys. This project is almost done. I actually know Mike Dez fairly well, I'm not sure if this is something he'd want to tackle but I could be wrong. I have dual injectors with there own fuel pump and computer controlling them to inject E98. Whatever tuner I use has to make this play well with the factory electronics and that's gonna have to be someone who is very familiar with the factory electronics. I'll give him a shout though I'd be curious what he has to say.


Sent from my iPhone using Tapatalk
 

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top