Kevin@PMP
Senior Member
2006 Mustang GT 24,872 miles, I am the original owner.
Screaming Yellow
Dark Charcoal Leather Interior
5 speed manual transmission
4 Stock 17x8 Bullit wheels with stock Perelli P-Zeros 235/55-17
4x Stock 17x8 Bullit wheels with 4x M&H Drag Radials 275/50-17 yes 2 sets of mounted drag radials
Mods:
PowerHouse Automotive Intercooled Turbo Kit with 67mm Precision Turbo (currently at 11psi)
Ford 39lb/hr Injectors
SCT XCal2 with Pro Racer Package
CMCV Delete Plates
HT0 Sparkplugs
Innovate Motorsports LC-1 Wideband O2 Sensor setup for datalogging with the XCal2
Kenne Bell 40amp Boost-A-Pump
Custom Piedmont Modular Performance Fuel System with Twin GT Supercar pumps and all new fuel line to the front of the car, this fuel system can support over 800rwhp.
Ford California Special Front Bumper
Shaved Fender Emblems (V6 Fenders so no filler)
Shaved Antenna with Powered Antenna Mounted to inside of windshield
Cervini's C500 Spoiler
VIS Racing Carbon Fiber Cowl Induction Hood
1967 Mustang Mirrors with custom cover plates for stock mirror location
SilverHorse Racing Honeycomb Taillight Trunk Panel
Factory Bullit Grille
Raptor Performance Shift Light in Custom Polished Billet Aluminum Mount in stock mirror
control location
Autometer Boost Gauge
Steeda Polished Billet Aluminum HVAC Controls
Line Locks with Hurst T-Handle Shift Knob with Button
MGW Chrome Pony Power Outlet Plug
15% Tint on Front Windows, 5% on rear glass and quarter windows
BMR Tubular K-member
BMR Lower Control Arms
GMS Front Swaybar Delete
CHE Adjustable Lower Control Arms with Rod Ends
CHE Adjustable Upper Control Arm with Rod End
CHE Adjustable Panhard Bar with Rod Ends
CHE Panhard Bar Brace
CHE Anti Squat Brackets
CHE K-member Brace with Torque Limiters
CHE Drive Shaft Loop
CHE Axle Brace
CHE Rear Swaybar Relocation Kit (Ready for 15" wheels)
LPW Low Profile Differential Cover
Denny's Driveshaft 1 Piece Driveshaft
Factory 3.55 Rear Gears
Centerforce Dual Friction Clutch
Fidanza Aluminum Flywheel
Parts not installed but are included:
CHE Adjustable Upper Control Arm Mount
Speed of Sound Triple Pillar Pod
Tullos Tech Boost Controller
9psi wastegate spring
Hawk HP GT Plus Front Brake Pads
Sullivan Racing Products Aluminum Racing Pedals
BMR Camber Bolts (car has a good alignment but these are included if you want to lower the car)
Diablo MAFia
I've probably forgot some things.
I am asking $23,500 OBO, I can also make someone a deal if they want to purchase any other parts with the car. If the buyer wants the parts installed, I can install them for a very reasonable rate. Email me at [email protected] if interested.
Screaming Yellow
Dark Charcoal Leather Interior
5 speed manual transmission
4 Stock 17x8 Bullit wheels with stock Perelli P-Zeros 235/55-17
4x Stock 17x8 Bullit wheels with 4x M&H Drag Radials 275/50-17 yes 2 sets of mounted drag radials
Mods:
PowerHouse Automotive Intercooled Turbo Kit with 67mm Precision Turbo (currently at 11psi)
Ford 39lb/hr Injectors
SCT XCal2 with Pro Racer Package
CMCV Delete Plates
HT0 Sparkplugs
Innovate Motorsports LC-1 Wideband O2 Sensor setup for datalogging with the XCal2
Kenne Bell 40amp Boost-A-Pump
Custom Piedmont Modular Performance Fuel System with Twin GT Supercar pumps and all new fuel line to the front of the car, this fuel system can support over 800rwhp.
Ford California Special Front Bumper
Shaved Fender Emblems (V6 Fenders so no filler)
Shaved Antenna with Powered Antenna Mounted to inside of windshield
Cervini's C500 Spoiler
VIS Racing Carbon Fiber Cowl Induction Hood
1967 Mustang Mirrors with custom cover plates for stock mirror location
SilverHorse Racing Honeycomb Taillight Trunk Panel
Factory Bullit Grille
Raptor Performance Shift Light in Custom Polished Billet Aluminum Mount in stock mirror
control location
Autometer Boost Gauge
Steeda Polished Billet Aluminum HVAC Controls
Line Locks with Hurst T-Handle Shift Knob with Button
MGW Chrome Pony Power Outlet Plug
15% Tint on Front Windows, 5% on rear glass and quarter windows
BMR Tubular K-member
BMR Lower Control Arms
GMS Front Swaybar Delete
CHE Adjustable Lower Control Arms with Rod Ends
CHE Adjustable Upper Control Arm with Rod End
CHE Adjustable Panhard Bar with Rod Ends
CHE Panhard Bar Brace
CHE Anti Squat Brackets
CHE K-member Brace with Torque Limiters
CHE Drive Shaft Loop
CHE Axle Brace
CHE Rear Swaybar Relocation Kit (Ready for 15" wheels)
LPW Low Profile Differential Cover
Denny's Driveshaft 1 Piece Driveshaft
Factory 3.55 Rear Gears
Centerforce Dual Friction Clutch
Fidanza Aluminum Flywheel
Parts not installed but are included:
CHE Adjustable Upper Control Arm Mount
Speed of Sound Triple Pillar Pod
Tullos Tech Boost Controller
9psi wastegate spring
Hawk HP GT Plus Front Brake Pads
Sullivan Racing Products Aluminum Racing Pedals
BMR Camber Bolts (car has a good alignment but these are included if you want to lower the car)
Diablo MAFia
I've probably forgot some things.
I am asking $23,500 OBO, I can also make someone a deal if they want to purchase any other parts with the car. If the buyer wants the parts installed, I can install them for a very reasonable rate. Email me at [email protected] if interested.