vortech/fmic boost # belt#

[jsusnaim]

Quick question!

i just finished my vortech v2 w/ A2A cx racing, blowthru setup.. i just left the 3.60 stock pulley on it for a while.. how much boost have you seen with a similar setup on u'r mustangs!

i also have an 3.33 pulley.. what belt did you use on your car

thanks in advance..

sorry 4 my bad english!

 

[JeremyH]

Every car is different. What style intercooler did you get, tube and fin or bar and plate? That will play a role as well.

http://www.s197forum.com/forum/showthread.php?t=73543&highlight=tube+fin

What is your boost level/power goal? MOst guys will drop to the 3.33 pulley though. If you make more power than your comfortable with you can always drop the max rpm.

 

[jsusnaim]

my goal 9-10 psi becouse im on stock sb.. i did the tube and fin cx racing..

 

[JeremyH]

You wont hit that psi even with the 3.33 pulley with a tube and fin intercooler, read through the link I posted above.

 

[TheKurgan]

Doesn't the SC mounting bracket have 2 holes...1 for HO and 1 for non cooled ? You shouldn't need a different size belt. I run a 2.87 pulley and using the same belt that came with the kit.