Aug 29, 2014 #1 despinos Senior Member Joined Jul 13, 2010 Posts 869 Reaction score 1 Location Albuquerque, NM I'm looking to buy an adjustable UCA and mount for a 2007 GT, preferably with poly bushings. Last edited: Aug 29, 2014
Aug 29, 2014 #2 skwerl tree hugger Joined Aug 6, 2011 Posts 16,197 Reaction score 1,145 Location central Florida Best you can buy- http://www.s197forum.com/forum/showthread.php?t=116363
Aug 29, 2014 #3 despinos Senior Member Joined Jul 13, 2010 Posts 869 Reaction score 1 Location Albuquerque, NM will it work for a 2007? I have been out of the mustang world for a while now so haven't been following
will it work for a 2007? I have been out of the mustang world for a while now so haven't been following
Aug 29, 2014 #4 skwerl tree hugger Joined Aug 6, 2011 Posts 16,197 Reaction score 1,145 Location central Florida I'm sorry, I missed that part. No, they aren't the same. This is the one you need. http://www.bmrsuspension.com/?page=products&productid=163&superpro=0
I'm sorry, I missed that part. No, they aren't the same. This is the one you need. http://www.bmrsuspension.com/?page=products&productid=163&superpro=0
Aug 29, 2014 #5 despinos Senior Member Joined Jul 13, 2010 Posts 869 Reaction score 1 Location Albuquerque, NM ah ok. I would have already bought it if it would have worked Is the mount necessary or will the stock mount suffice?
ah ok. I would have already bought it if it would have worked Is the mount necessary or will the stock mount suffice?
Aug 29, 2014 #6 skwerl tree hugger Joined Aug 6, 2011 Posts 16,197 Reaction score 1,145 Location central Florida On my Bullitt I used the stock mount for a while. The bolt holes are larger than the bolt diameter so there will be some slop and clunking unless you use some shims such as these: http://umiperformance.com/catalog/index.php?main_page=product_info&cPath=12_131&products_id=341 I eventually went with the BMR mount since I was drag racing and putting a lot of load on that mount.
On my Bullitt I used the stock mount for a while. The bolt holes are larger than the bolt diameter so there will be some slop and clunking unless you use some shims such as these: http://umiperformance.com/catalog/index.php?main_page=product_info&cPath=12_131&products_id=341 I eventually went with the BMR mount since I was drag racing and putting a lot of load on that mount.
Aug 29, 2014 #7 BadPiggy Hooligan Asshole Joined Oct 26, 2012 Posts 3,503 Reaction score 3 Location Knoxville, TN http://www.s197forum.com/forum/showthread.php?t=116482 If you want used, here you go if you can't find BMR pieces. I'd check the Steeda site before buying. Make sure the "05-14" is correct.
http://www.s197forum.com/forum/showthread.php?t=116482 If you want used, here you go if you can't find BMR pieces. I'd check the Steeda site before buying. Make sure the "05-14" is correct.
Sep 2, 2014 #8 Rob@Evolution forum member Joined Jun 26, 2014 Posts 177 Reaction score 0 Location Aston PA despinos said: I'm looking to buy an adjustable UCA and mount for a 2007 GT, preferably with poly bushings. Click to expand... I have a new BMR UCA for your car $175.00 shipped. Get back to me if your still looking
despinos said: I'm looking to buy an adjustable UCA and mount for a 2007 GT, preferably with poly bushings. Click to expand... I have a new BMR UCA for your car $175.00 shipped. Get back to me if your still looking
Sep 2, 2014 #9 roberts forum member Joined Jul 19, 2011 Posts 1,481 Reaction score 1 Location Bonne Terre, Missouri if your still looking i have the upper mount i got from umi. just pm me if your interested.