Recent content by AK_Stang

I did the exact same thing with no problems. Sent from my SAMSUNG-SM-G891A using Tapatalk

Car was definitely in an accident prior to me purchasing. Sent from my SAMSUNG-SM-G891A using Tapatalk

It's been sitting on the jack stands all week and I finally figured out the problem. I pulled the strut bolts out to check the holes to make sure they were not slotted and noticed that the lower hole had metal shards. I remember it was a tight fit going together but just hit it with the...

Factory strut to spindle bolts and the holes are not elongated. I will pull it apart further tonight and maybe even pull the other side apart to get a good comparison. Sent from my SAMSUNG-SM-G891A using Tapatalk

I bought it this way so I'm not sure what happened. Just trying to get it fixed. I replaced the strut this weekend thinking it was bent and wanted to upgrade anyways. There is much greater clearances between the strut and tire on the other side. Since the strut attaches directly to the...

Camber on the passenger side is way out. I looked and could not see any damage but I'm thinking it has to be the spindle/steering knuckle. On this side the strut is nearly touching the tire. Anyone have a passenger side spindle for sale?

Most of the damage is to the outer sheet metal. Car still drives straight and tracks fine. I'm tempted to get it for the spare parts and then build the motor for a supercharger and ebay the rest of the parts. Seems like there would be hundreds of parts in the $50-100 range that I could...

The back bracket bolt for heater pipe broke off on the back of the head on a car I recently bought. I just cut the pipe where it transitions to the larger diameter and used a short piece of 1/2" heater hose and two hose clamps. Pressure tested to 16 psi and it's working fine. Five minute fix...

Have a chance to get a good deal on an insurance buy back. Trying to decide if its worth it to repair the car or just part it out. I would swap out or sell the Bassani exhaust, cold air intake and a few other minor parts to my other Mustang and then try and sell as much as possible on Ebay...