Hi Gabe - I don't post enough to DM, so I hope this finds you. I saw you post on running 305/35/20 tires on 20x10s with 48mm offset. I want to do the same, but know the brand can make a difference. With your setup, were you lowered on NT555Rs? Further, if you could have gone with a greater offset, such as 50, would it have been beneficial or would the tire hit the inner liner or bump stop bracket?
A 305 tire really wants to be installed on an 11"-wide wheel, which would fit on the back but you'll need an offset in the 52-60mm range. My car has been lowered for over 6 years, and it was lowered when I ran the setup you asked about. At the time it was on Steeda Sport rear springs, currently it's on BMR springs which lowered the rear about 1.5" (I think the Steedas lowered the back a little less)
My situation is that I have a set of ET42 20x10s, which don't tuck enough for my air suspension. I have a local shop who is comfortable milling the mounting hub to increase the offset and I am trying to determine the most appropriate offset. I know AMR and Razor wheels have 48mm offsets, but was curious if going higher - such as 50 (or more) would work, assuming there's a safe amount of material to remove.
I'd say making them 48mm offset should be more than enough for what you need. That 48 with a 285 tire would be perfect. You can try a 305, might rub a tiny bit, not sure, don't have experience with air suspension
Hey brother how are you doing? I can’t send you a message so here I am. I got that p012b code on my gt500 and you are the only one with an actual answer to this problem but your pictures on that post do not show I was woundering if you could tell me where that sensor is. Found that there’s one on the egr but just want to make sure. Thank you in advance.
Hi there. The pic in the link below shows the vacuum line break, a thin double line that goes from the supercharger to the EGR valve: https://farm8.staticflickr.com/7820/47443119112_08492e8159_o.jpg The pic in the link below shows the line re-connected and some rubber tubing being used to patch the break: https://farm8.staticflickr.com/7870/33619280908_09aa2161b2_o.jpg
That would work. I can't send you a private message for some reason, you must have that shut off. This is visible to all members.
I will do $150 for the injectors, I have an 05 gt so i would have to get the injector hats to make them work, these are the 56lb/hr injectors correct?
Random question. I'm in the process of purchasing a house in Londonderry nh, and I was wondering if you knew of anybody the does hardwood floor installation. The job will include the removal of tile. Sorry to bother you but after reading your post, I assumed you might know someone. Thanks Ken
![[IMG]](proxy.php?image=https%3A%2F%2Ffarm5.staticflickr.com%2F4697%2F39835920401_d4c30e91e5_o.jpg&hash=49d584c8c418457a6af90a07dc97650d)