Search results for query: *

  1. saleen836

    Not starting on button

    As title, a friend here in the UK has a 23 plate auto Mach 1 Previously it wouldn't start on the button so dealer replaced the control unit and switches, all good for past 3/4 months until this morning, it would not start again, nothing showing on the dash like 'depress brake/clutch'. Said this...
  2. saleen836

    2006 GT Water Crossover Gasket fitting Kit

    I do need sealant, as I mentioned earlier in this thread if the existing gaskets are damaged through age and/or I can't get new gaskets I will use a good sealant
  3. saleen836

    2006 GT Water Crossover Gasket fitting Kit

    Will be getting some decent gasket sealant as well, am hoping to re-use the exisitng gaskets but if the parts don't fit once it is apart a good sealant will be used rather than have the car off the road and stuck in the repair shop for weeks/months while I try to get hold of a fitting kit
  4. saleen836

    2006 GT Water Crossover Gasket fitting Kit

    Sorry, I forgot you put the date the other way round to us (we put D/M/Y here in the UK) the expected shipping date is 02 August as the link says
  5. saleen836

    2006 GT Water Crossover Gasket fitting Kit

    (Appologies if I have the wrong name for the part in the title) On my 06 Saleen I need to remove the water crossover pipe to access the filler bolt for the supercharger to drain/refil the oil, I have been told the gasket fitting kit for this is discontinued by Ford but have ordered this kit...
  6. saleen836

    TR3650 Impossible to find shifter hardware

    You might be better asking cavero if you can buy theirs as I am across the pond in the UK so shipping might make it costly, no problem letting mine go if you get stuck though
  7. saleen836

    TR3650 Impossible to find shifter hardware

    Pin and bolt? I still have the nuts that came off mine when I had the MGW shifter fitted
  8. saleen836

    On going Clutch issues and a big Hello from England!

    Welcome Terry another UK resident here (between Bath & Salsibury), I upgraded the shfter on my '06 SC Saleen to the MGW shirt shift kit and it works fantastic, as for the clutch issue I would agree with the previous poster and point the finger at the flywheel for a starting point. If you use...
  9. saleen836

    UK and Canadian exports

    An interesting question posted on a UK Mustang group I am a member of regarding the on board mpg computer, I know with my '06 I just add 20% on to the readout to allow for the difference between a US and UK gallon. With the S550 having been produced for the UK market, does anyone know if they...
  10. saleen836

    Aluminum Hood....

    I do, but when you are paying $100k + for a car you don't expect problems with it
  11. saleen836

    Aluminum Hood....

    And Ford still didn't sort out the issue as the S550's suffer the same problem on the front fenders and hood! Having said that Aston Martin cars also suffer the same problem
  12. saleen836

    2019 Bullitt rear end CLUNKING

    Unless it is something simple like the rear seat back rattling in the latch I would look at the rear diff flange, quite a few Mach 1 owners here in the UK have had them replaced due to a clunking sound
  13. saleen836

    Walbro 400LPH pump

    As already mentioned it is plug and play, I have one in my 06 SC Saleen, had the GT500 set up originally but that failed so reinstalled the standard pump with a BAP, this worked fine except it would sometimes hesitate for a split second if I had been driving at a set speed for a few miles then...
  14. saleen836

    Drank the Kool-Aid - MGW

    Looking to purchase the MGW shifter for my 06 Saleen, OP did you have any interference problems with the shifter kit and 1-piece prop? is your car lowered? as MGW when I spoke with then recently informed me the max diameter for driveshaft is 3.5" to avoid interference but if the car is lowered...
  15. saleen836

    Ford Racing Driveshaft Fitment 2005- 2010

    I had a DSS one piece fitted to my '06 Saleen,only downside was having to remove the Saleen short shift kit as the driveshaft would not fit
  16. saleen836

    Strut Tower Brace (with Supercharger)

    A friend here in the UK has a 2005 with the Edelbrock supercharger fitted and wants a STB, anyone know of one that will fit and still allow the hood to close or will he be better off having one fabricated?
  17. saleen836

    Mufflers!

    As title, a friend here in the UK has a 2006 GT with this exhaust system... https://www.cervinis.com/05-09mustang-side-exhaust-kit.html he is looking for mufflers as they need replacing, anyone know if/where they can be bought seperately or a muffler that will fit?
  18. saleen836

    Headlight Adjuster

    Being in the UK the chance of finding one is very slim No standard lights The adjuster just pulls out and has parts missing so is broken, he is going to bodge it for now and buy some aftermarket headlights
  19. saleen836

    Headlight Adjuster

    Thought that would be the case, thanks for your help
  20. saleen836

    Headlight Adjuster

    Message sent, thanks
  21. saleen836

    Hey, this is the VIN for my friend's Mustang here in the UK... 1ZVFT82H475214759 Thanks

    Hey, this is the VIN for my friend's Mustang here in the UK... 1ZVFT82H475214759 Thanks
  22. saleen836

    Headlight Adjuster

    As title, is it possible to purchase the adjuster seperate from the actual headlight unit ? A friend has an '06 model and one of his is broken, have tried searching but being in the UK some sites in the US are blocked
  23. saleen836

    Supercharger install information

    Stops the alternator spinning to fast and failing, I believe the Saleen SC kit comes with a different pulley for the alternator
  24. saleen836

    Supercharger install information

    You might want to think about putting a larger pulley on your alternator or you could find it breaking down in a short space of time

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top