Search results for query: *

I'm no longer going to do the build I had been planning, so time to start selling parts. All prices are shipping within the continental US. If local and wanting to pick up we can work a lower price. I am located in Lancaster Ca. 2007-2014 65MM Cobra jet throttle body. Brand new, never...

All prices are shipped to lower 48 unless stated and firm unless you come and pick them up. Located in Lancaster CA 93536. All parts are for 2005-2010, might fit 2011+ Upper grille Modern Billet pony delete. $80 shipped will come with all hardware to install. No nicks or oxidation. Ford...

Looking for the electrical harness that connects the seat belt buckle and position sensor to the plugs under the seat. If local I might be willing to buy factory seats in bad condition. Josh

I had a shop do a battery relocation and kill switch install a while ago and have been having some problems so I finally went through and removed the kill switch and solenoid and now it's set up like a normal battery relocation (i think) which just about fixed all the issues. However I was just...

Hey guys and gals, i'm looking to purchase the timing cover for a 3v. To my knowledge there is no difference between any of the years of 3v so one from 05-10 will work for me. Let me know what you have. Thank you. Joshua

Looking for a set of 60lb EV6 fuel injectors. Low miles and in working order. Let me know what you have or if you know of anyone selling some. Thanks

Alright guys selling some parts I no longer need. I am willing to ship parts unless stated local pickup only. Located in Lancaster California. Prices are OBO, however be reasonable. Thank you. First up is a set of J&M rear stainless brake lines. Used for 50 miles and then removed because they...

Looking for used GT500 twin fuel pump hat assembly. I do not need the FPDMs just the hat assembly. Let me know what you have. Thanks Josh

I bought this new a while ago and am changing the setup in the car so looking to sell the shifter. It has a small chip in the paint on the piece you remove to get to the release. Other then that it is in perfect condition and functions perfectly. $400 shipped. Buyer pays all fees. This is the...

I'm looking for a set of stock GT cams. If the year of the engine matters mine is an 05. Looking for low mileage, good condition cams. Let me know what you have. Thanks. Josh

Selling some things i've had laying around the garage for awhile. Location Lancaster CA. First is an Autopower bolt in 4 point roll bar. Used for a short period of time when the car was used for track days. Really just for harnesses. Has some paint chips from installation and removal. Will come...

I'm currently running a MT ET street radial 325/50 15 on a 10 inch rim. At 20(hot) Psi the car is hooking. However the foot print is 10 inches. Am I gaining anything by running a 325 if i'm only putting 10 inches to the ground? In the picture you can see where the tire is contacting the ground.

I started installing longer arp wheel studs onto my 2005 mustang. The car has Moser axles. The axles had oem wheel studs on them. I started on the passenger side and hit out the wheel stud and used the bearing and washer method that I had read on here the other day. Didn't take to much force to...

I just installed a canton battery box reservoir and have a few questions. How full should it be and is a very agitated flow normal with this reservoir? With the supplied whipple reservoir you could see the flow but it wasn't so "violent" I have the hose returning to the reservoir in the top...

The hood has been on the car for about 2 years. The paint is good and the only damage is where the hood pins go through the hood (please excuse the dust). On the underside, a shop I took the car to forgot to do the pins before opening the hood and messed up the fiberglass some. (pics included)...

I'm in the process of getting my 15x10 direct drill dark star race star drag rims to fit. They have 325/50/15 tires on them. I've removed the bump stop bracket. I'm however hitting on the aftermarket braided brake lines on the rear. They come off the caliper at an angle toward the front of the...

I ordered a set of dark star direct drill drag rims from JP and he gave me an amazing price and was very helpful. We had some problems getting the correct lug nuts sent to me. First I got closed end when they were supposed to be open, then I got camaro ones and then I was only sent 10 of the 20...

The factory intake manifold with the butterfly valves and motor for them. $50 plus shipping has 45,000 miles

Sorry I could not get it to embed. I looked through the we now have video thread and didn't see where it said what part of the url is needed from photobucket. If someone could please embed it or tell me how, I will fix it.

Took my mustang to Fontana today and ran an 11.8 at 116 my first run. I only got one more run in and I red lighted :mad2:!!! Had my Nitto NT05Rs(305/45 18) at 25 psi and left off idle. Hooked perfect and left good. Feels like the car has more in it, just need more seat time. I will definitely be...

I was doing some little things under my hood to help clean up the wiring and over all look and I twisted the Whipple MAF housing 90 degrees to hide the wires coming from the MAF. The MAF is now orientated as the attached picture shows. (Sorry for crappy paint drawing, but I do my best :boobies:)...

The video is of my best two runs. It's not the best video, but i'm using the movie maker that came on my old laptop so it is what it is. Best run was 10.4 @ 106 mph with spinning off the launch. Track isn't prepped and is only 1000'. Before cams and new tune my best was 10.2 @ 104 mph, but I was...

While I was gone for business my girlfriend who loves the mustang as much as I do took it for a drive. Normally that's fine, but this time she bottomed out on a speed bump hitting the deep transmission pan my 5R55S super street fighter has. The overdrive off light is flashing, but will go off...