Search results for query: *

I was cleaning out the garage and came across these parts that were never installed before I sold my car. First is the LPW Rear end cover, it's the extra low profile for the s-197 cars. Asking $115 shipped. I also have a BMR rear differential bushing kit, part number EN001. Asking $40...

I have a year and a half old Matco 6s model 6228RX that I would like to sell. It is in good condition except for a spot on the back where the paint is gone, it's about 2" tall by 4" wide and some minor scratches here and there from everyday use. The spot on the back was there since he rolled...

I am about to put it on the market again and wondering what I should be asking so I don't have to sit on it any longer. It's an 05 and has 14,xxx miles, IUP package, shaker 500, leather interior. I am going to get the tune taken care of before I list it due to the cold start issue but other...

I am going to be pulling off my BMR adjustable a-arms in the next few weeks so I need the stock a-arms. Let me know the price shipped to 62301. If you are interested in the BMR's we can swap with money on your end.

I have a Paxton 2200 for sale, it has less than 3000 miles on it. I am parting out my car so I can move onto another project. It is the polished version and it is not the seld lubricating version so you will have to tap the oil pan. It has an upgraded aluminum coolant reservoir, 39 lb...

I have a JPC intake, fuel rails and fuel rail adapter with less than 200 miles on them for sale. THey are all like new and the only reason I am selling is I am parting out the car and starting a new project. Asking $900 shipped for the intake, $230 shipped for the fuel rails and adapter. I...

I am bored with my car so I am going to try to sell it and move onto something else. I bought it 3 1/2 years ago with 9,300 miles on it and now it has right at 14,000 miles on it. The interior has red leather seats and the carpet/interior panels are black. It has the IUP package with my color...

I have been highly considering this lately and was wondering what shops offer support for this? I know VMP does and I am going to be calling him as soon as I get some free time at work to discuss it. I want to know who all will write a base tune since some parameters aren't available unless...

I am on my second tuner and this was my fourth revision and I'm still having horrible issues with cold starts. I had one revision that idles around 14.4 on the wideband but the tip in goes so lean that it cuts out, it will fall on it's face or die. The latest revision idles at 10.1 on the...

I have a set of wheels and tires I bought a couple years ago on here and never made it to the strip with them but I did put about 5 miles on the street with them. They are in good condition with plenty of tread left, rears are MT radials 325-50r15 and fronts are MT Sportsman's 28-7.50-15. There...

I have a brand new 8 rib kit that I bought for my Paxton 2200, I no longer need it since I'm not going to build my engine. I bought them from Summit and the one pulley came with the factory ford part numbers ground off. I'm asking $600 shipped for the kit. If interested, I have a IW 10%...

I'm needing to get a new tune for my car, I'm tired of the cold start bullshit and was wondering if there are any decent tuners within a couple hundred miles of St Louis. I would prefer to have it dyno tuned but I may end up going with a remote rune.

I have a brand new brake kit part # B4148WC along the brake lines and adaptors for sale. I bought these with intentions of setting my car up for the drag strip but I have decided not to go that route anymore. $550 shipped in the lower 48. Here are the links...

307-0011 - Steeda Ultralite Full Cowl Induction Hood PM you best price shipped to 62301, it will be shipped to a business address(body shop).

I have a C&L street intake with appoximately 1,500 miles on it, I removed it for my paxton. I'm asking $130 shipped.

I have a set of BMR a-arms with approximately 2,000 miles on them. They have a few rock chips and a spot on the end of one where the shop that installed them and my k-member hit it with a hammer. I took these off so I could install adjustable arms for my holeshot wheels. I'm asking $300...

Just trying to figure out if I should stick with Currie or go with a strange.

I was looking at these online but I can't find any good pics. I am trying to find one that someone has on their car, I really need a pic of the bottom side.

I told Laura I would post up a few pics of my car with the Holeshots so here they are.

Pm me a price if you have one

Just as the title says. I need the correct size so I can start looking for a used 8 rib before I go home for the winter. I want to find a used one cheap or borrow one for about a month so I can have one custom made.

I took up golfing this summer since I haven't been able to play with the car this summer. It simply amazes me a game that can be so frustrating at times will make you want to play more lol. My scores aren't that great since I haven't played enough to be consistent but my scores average about a...

I was sitting here thinking about what all I need to do to my car this winter and was wondering what you guys with CJ springs are doing with your bump stops? I am assuming I need to trim them since I could see where they have been hitting when I had stock springs in.

I normally run Motul RBF600 but I ran out and I need to know what would be available at the parts stores that is comparable or at least compatible that I can add to the reservoir. Thanks in advance.

My clutch is done for after last night, I want to go ahead and upgrade the trans while I am at it since I hate the way they shift. I am trying to figure out what would be best for my car since the car will sit all year long while I am working out of town. I am undecided between an auto and a...