Search results for query: *

  1. 2

    My nightmare trying to get my 2005 GT to run.

    Check the alternator ... unexplainable crazy stuff happens when they go bad
  2. 2

    valve trane noise?

    I post mostly on another forum but snoop around here from time to time.. I have a built 298 with all the goodies and it ran fine till the head gasket went bye bye. I have the dreaded "tic" that has no sure explanation. this is my third time with it... first time we knew it was a rod bearing...
  3. 2

    going with 373's

    I am running a 298ci,forged ported and polished, KB 2.6 blown, putting down 550rwhp and 585rwtq.. I am going with 3.73 gears and eventually a 6 speed.. just looking for someone with a tru-loc installed...
  4. 2

    going with 373's

    I am looking at upgrading my differential while I have the rear apart.. does anyone have a True Lock installed on a car they also use on the street?
  5. 2

    Anyone using Meth?? (not the drug)

    I have 100% meth on my stroker... don't really know how much HP gain there was just from that because it was done while the motor was being up graded.. the only down side with it is once you set it up for it you have to always use it.... I am not quite sure why this is but the guys that put it...
  6. 2

    boost

    oh shit.. this isn't a Mustang forum... damn C YA!!!!!
  7. 2

    I fixed the grinding when cold,but I have some questions

    oh the things to look forward to....
  8. 2

    Spring rubber????

    So what would the problem be N E ways??? turns out I am fine for now and I will raise the car back up if need be... the spring rubbers I was talking about are the kind that look like a doughnut and get stuck in with the tires hanging from a jack under the sub frame. they still make them and I...
  9. 2

    Traction help

    :beer:yea..... what he said^^^^:beer:
  10. 2

    Spring rubber????

    I put the DR's on my car and there doesn't seem to be an issue... I was just thinking that a M&H 325 45r17 might not fit on a dropped Mustang.. there is less than 1.5" of clearance at the top but it drives just fine... guess but body doesn't move very much... and man can I feel the difference...
  11. 2

    Spring rubber????

    I am thinking about it... I just got the M&H 325 45r17's and I an going to go to my shop (I work at a large landscape company) and throw them on the rims and I was just taking a shot to see if anyone knew. prob wont test them on the car till tomorrow... I know all about that shoveling snow...
  12. 2

    Spring rubber????

    is it that stupid of a question or do we just not know????
  13. 2

    Will 16x10 Bogarts fit s197?

    well I think the lug pattern is pretty close second... 4.5 lug and 7.5" backspace... and you can fit up to a 28" diameter
  14. 2

    Spring rubber????

    I know the left turning community uses spring rubber all the time... I was wondering if I need to raise the back up a little to fit the 325 45r17s on my lowered Stang, if spring rubber would even be possible? Sounds to me like it might work.. raise it up and stiffen it up to keep the body off...
  15. 2

    Can our stock engines handle 12psi?

    you do like your trailer.... I would have to make some super modified ramps to get mine on one... thinking about it though... do they lower trailers????
  16. 2

    Wideband installation?

    if you remove the left front tire and the plastic inner fender (very easy) there is access down from the engine bay and a large rubber grommet to pass the wires thru.. I had to cut a small slice it it to get them thru... just another option.. I did it this way because I have pillar pods
  17. 2

    Not another LT header question!

    I have the BBK ceramic LT's and o/r H pipe with Magnaflow axle backs.. they are loud but my neighbors will still talk to me..
  18. 2

    Traction help

    autocross and drag require different setups and if you want grip off the line or from a dig your pinion angle has a effect on it as well as all the other mods suggested ^.. if you do intend at some point to switch things up it is good to put as many high quality ADJustable parts on it...
  19. 2

    I need a 8 point cage!!!

    Someone please tell me where to look for a cage for my vert.... you know everything else.. I cant find a frabricator in KC to do the work... HELP!!
  20. 2

    To All You Vert Nerds Out There!

    Another Vert in the house....
  21. 2

    s/c mods

    I got the 8 rib when I got my stroker built and also went with the Thumper tensioner... it was expensive but I am running 16lbs of boost and have had no issues with belt slippage.
  22. 2

    I need a 8 point cage!!!

    Mister Roper; I was on my BFG G-force 275 40r17's at 15 psi... I have a pair of M&H Race Masters on the way 325 45r17's that should hook alot better... My track here never enforced the 13.5 sec rule and all I have to have is a helmet and firesuit-jacket Racevert... where did you get your cage...
  23. 2

    I need a 8 point cage!!!

    I am going that way... it is a vert tho... getting a 6060 and tru trac before spring along with some M&H Racemasters... I have not had a run yet where it hooked... I was running 12.0's at 455rwhp and thenI had the motor work done. I am now putting down 550 and making the mods to make it hook...
  24. 2

    I need a 8 point cage!!!

    I am going into the 10's this spring and I need a cage. Where did you get yours and what is the expected price range. I have been a guest here quite often but signed up today.. Thanks

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top