Search results for query: *

that's one thing I never understood with ford, my dads 06 f150 has auto headlights but my 08 mustang doesn't and its not even an option either.

I know this is a few months old but any trouble with balancing or run out with your wheels?

I'm looking to buy a set of black bullitt wheels from them but if shit has gone down hill with service I wonder if their products are any good.

Since you said the engine is running hotter and sounding different, is there a way to check your o2 sensors? Maybe a clogged cat converter if you still have them installed?

I have an opportunity to pick up some 2011 gt500 wheels for cheap but not sure if they would look right on my car. I have a grabber orange mustang and I can only find one pic of a similar car with these rims and not sure if they would work well. I attached a link pic of the setup. Also I...

ok cool thanks everyone! Then these tires will be what goes on the rims very soon. And as far as the snow goes I got dedicated rims and tires for that mess lol.

https://www.tirerack.com/tires/tires.jsp?tireMake=BFGoodrich&tireModel=g-Force+COMP-2+A%2FS Has anyone ever ran these tires? I have summer tires on my gt500 rims and they will need replacement soon but I don't drive anywhere to the point of absolutely needing a summer type tire. I'm mainly...

where I work all of our box trucks came factory with tire rated load F at 95 psi max and that's where they were set from the dealer, even says it on the door sticker. Now we have changed some of the tires over the years to a brand that was load G rated at 110psi max but we still run the pressure...

I think it may have to do with the fact that the convertibles are heavier. So the one inch drop it provides the coupes may be more on the convertible and that the ride they give will be different as well.

if your looking for more handling my first question would be whats your current wheel and tire setup and are you looking to get lowering springs? If its performance you seek maybe look into a full cat back and an intake manifold then go to fords hot rod cams after that.

yep 255/40's

not sayin its ok to run it that way, the op was looking to see if it was done and what it looks like.

https://themustangsource.com/forums/f691/new-rims-how-big-tire-471863/ post 13, 275's on 8.5 rims

255's on a 8.5 rim should be perfect with fitment, now 255 on a 10 in rim will have a lot of stretch I wouldn't recommend running that setup. this picture I found on another forum is a 255 on a 20x8.5 rim here is a 255 on a 10in wide rim

I'm not a huge fan either of the all black wheels but if I had them they would have to be the gloss black. The satin and matte reminds me of old steel wheels. Chrome looks good on certain cars but ya cant over do it, now I do have chrome wheels on my mustang and I think its looks good. My dads...

My Dad got a new truck back in august since his previous one was damn near rusted off the frame. So he went from a 94 base f150 that had130,000 to a 06 HD f150 with 84000. This truck was an out west vehicle so there is absolutely zero rust on it and it was equipped with a huge ass fuel tank...

lmr has a carbon fiber smooth piece https://lmr.com/item/TRU-10024-LG34/trufiber-mustang-blackout-panel-w-hole-carbon-fiber-05-09 and cj's has a paintable one http://www.cjponyparts.com/3dcarbon-taillight-panel-molding-2005-2009/p/TPM13-V/

I think he may be referring to these if I'm not mistaking. CDC has one that makes the trunk lid look even with the taillights. http://www.americanmuscle.com/2005-deck-lid-trim-panel.html

Exedy clutch with a resurfaced flywheel here aswell, all is good.

here are mine, I have the red diffusers. Now the description for them says they don't sequence when the hazards are on but mine do.

ill take a look to see what they offer ok thanks ill check them out too

that's what I was afraid of. but worse comes to worse ill just do factory covers again if they wont do custom.

gonna get the shop cut the foam, I figured ill get them to do everything that way its all done at once

ok that's good to hear. personally I thought that it shouldn't be an issue for shops to deal with, maybe it was an issue when they first became available in the seats.

I have a few questions, I want to get my stock leather seats redone with new bottom foam and possibly going with a better leather or perhaps a soft vinyl. Now my seats come with the side air bags and I heard that upholstery shops may not touch them due to having the air bags. Is this true, and...