Search results for query: *

  1. Grimace427

    Photos and Video Of The Black 2015 Mustang GT On Display @ The 50th

    The performance package comes with 275/40/19 rear tires.
  2. Grimace427

    "GT350" Spotted with Less Camo

    Sorry to hear about your bad luck, but your methods won't prevent the car you choose from having issues. When the 2013's hit they had crank sensor o-ring issues causing the cars to shut off while driving. Also the front LCA groaning issue seemed more common with '13s than the earlier models, or...
  3. Grimace427

    "GT350" Spotted with Less Camo

    The Coyote can be punched out to 351ci. JPC's $15,000 kit apparently can handle 1,500+hp, but I haven't actually seen any of those kits putting down the numbers. Might as well wait for the 2035 model, or the 2064 model. Every new model gets its own share of kinks.
  4. Grimace427

    alingment spec advice and tire opnions.

    How did you get GT500 mounts to work with 2012 front struts? My understanding is the GT500 mounts only work with 05-10 front struts.
  5. Grimace427

    "GT350" Spotted with Less Camo

    Every suspected SVT prototype seen testing on the streets had some form of Coyote engine with a traditional cross-plane crank. Unless they are going to release an FPC engine without road testing I think that is still a wild rumor.
  6. Grimace427

    "GT350" Spotted with Less Camo

    295/35/19 Michelin Super Sports to be exact.
  7. Grimace427

    Gauge cluster/ecu issue after new tune

    Make sure to always have a battery charger connected when uploading tunes.
  8. Grimace427

    "GT350" Spotted with Less Camo

    It looks like the older prototype that was running around last summer. The wheels look about the same and they weren't covered back then. The entire taillight panel isn't quite the same as the show cars we've seen since the Dec. 5th reveal so I just think these are early prototype taillamps.
  9. Grimace427

    A new product to help with the 5.0 coyote #8 cylinder problem

    Plus the fact that MMR admited cylinder #4 was the hottest spot in the engine and the location Ford decided to put the cylinder head temp sensor.
  10. Grimace427

    Power bump of 5.0??

    Order guides will be available in April, production to start in July with expected ship dates in August according to a seemingly reliable source. http://www.mustang6g.com/forums/showthread.php/rush-2015-mustang-1104.html
  11. Grimace427

    S550 Mustang Suspension and Powertrain Discussion

    Not to say it won't happen, but as the Coyote sits now it will require some redesign. Some of those magazine guys assumed the Coyote would get DI back in 2011.
  12. Grimace427

    S550 Mustang Suspension and Powertrain Discussion

    S197 track 62.3F/62.9R, S550 track 62.3F/64.9R. That was a false assumption by a few magazine editors when they saw a little bump in the combustion chamber. When you look at the top side of the head you see there is actually no room for a DI piezo injector. The heads would need to be...
  13. Grimace427

    Power bump of 5.0??

    They could just be waiting to crash the 6G Camaro reveal.
  14. Grimace427

    Cammed Mustang 5.0 Issues

    For 2013 and some 2014 models there is an issue with the crank position sensor. There is a missing or damaged o-ring that mounts the sensor in the bellhousing that causes erroneous sensor readings, thus causing misfiring.
  15. Grimace427

    Ride Height Issue with 05-10 Struts on 11-14 Mustang

    This is my daily driver and the ride is very good especially for the roads around here. I scrape only on large speed bumps but otherwise no complaints. If/when I change anything it will be Koni Sports to replace the STR.T's.
  16. Grimace427

    Ride Height Issue with 05-10 Struts on 11-14 Mustang

    That is my exact setup, Koni STR.T with 'P' springs on GT500 mounts.
  17. Grimace427

    Aimpoint Comp M4 $550

    Sold. Thanks for looking.
  18. Grimace427

    FS: Black 2011 GT - Tasteful Mods - 23K miles

    From a fellow NoVA member GLWS. I don't think I've ever seen you on the roads. I'm in the Vienna/Reston area most of the time. What are you looking to replace it with?
  19. Grimace427

    2014 Mustang GT MT-82 transmission sounds like a diesel pickup truck...

    It doesn't matter what gear you are in, when rpms are at 1,000 or below it will make that noise.
  20. Grimace427

    2014 Mustang GT MT-82 transmission sounds like a diesel pickup truck...

    10-4, lugging the engine in a higher gear will definitely cause a rattling sound up front in the clutch area. I've driven about 5-6 different 5.0's and everyone had the exact same sound even with different mods.
  21. Grimace427

    Any Dynatech Vendors??????

    Don't go too fast, you might knock over your mailbox.
  22. Grimace427

    Aimpoint Comp M4 $550

    Yes still for sale, $500 if you want to pick up in person. I can meet you anywhere between here and Baltimore. I'm not sure I want to bring my arsenal to MD but if you want to come down to VA I'll cover an hour in an indoor range if you want to check it out. It's been too long since I've been...
  23. Grimace427

    boss intake steeda strut brace fitment?

    Here's mine with the Boss-specific Steeda STB. Has about an inch of clearance. http://www.steeda.com/store/steeda-v6-boss-mustang-double-bar-strut-tower-brace-555-5718/
  24. Grimace427

    Aimpoint Comp M4 $550

    PM replied.
  25. Grimace427

    Aimpoint Comp M4 $550

    Yes

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top