So to cut a long story short, someone ripped by driver turn signal out from back off a curb and running it over..when i got it back to check it out it obviously ripped the wiring out with the whole light, the only thing i could salvage was the turn signal harness and plug and also the marker harness, i had to get a new marker bulb socket and repair the wiring, white/red and grey/black wires were torn up to the chassis while the others were down at the light level and could easily be fixed...
now heres the problem..i have no turn signal, i have marker and parking lights..but no turn...now if i stare at the bulb..the main filament will slliighhhttyyyy dim with the turn signal on..but the secondary filament for the turn signal never comes on...
what am i missing here?? this is driving me nuts!!
now heres the problem..i have no turn signal, i have marker and parking lights..but no turn...now if i stare at the bulb..the main filament will slliighhhttyyyy dim with the turn signal on..but the secondary filament for the turn signal never comes on...
what am i missing here?? this is driving me nuts!!